4 disc changer
-
moparman00
- 2GN Member
- Posts: 215
- Joined: Thu Aug 28, 2008 12:56 pm
4 disc changer
does anybody know why my stock 4 disc changer with my stock head unit might not be working? no lights on it, no matter what button i push on the head unit....maybe i forgot how to use it? idk...
- Swordfish2Cowboy
- 2009 Silver Contributor
- Posts: 2693
- Joined: Sat Aug 25, 2007 7:06 am
- Location: Sandusky, Ohio
-
moparman00
- 2GN Member
- Posts: 215
- Joined: Thu Aug 28, 2008 12:56 pm
-
moparman00
- 2GN Member
- Posts: 215
- Joined: Thu Aug 28, 2008 12:56 pm
ok, as for pulling out the head unit, im assuming that you just have to take the trim bezel off, then the two screws on the sides of the head unit....but for the cd changer, how does that come out?03neonSE wrote:pull the stock unit out and check the harness plug. if all fine there, pull the cd changer out and check the plug. unplug and plug it back in.
-
LilSparkPlug
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
-
moparman00
- 2GN Member
- Posts: 215
- Joined: Thu Aug 28, 2008 12:56 pm
- TheRandom1
- 2GN Veteran
- Posts: 9938
- Joined: Mon Jan 02, 2006 11:17 pm
- Location: Chicagoland
On the stereo bezel, pop your HVAC knobs off first, then pop out your vents, there are two phillips screws in there, take those out and just pop that out.
The cd changer bezel just pops out like Crystal said.
Dumb question, but you are using it with the stock stereo right?
The cd changer bezel just pops out like Crystal said.
Dumb question, but you are using it with the stock stereo right?

Danteneon wrote:You doing this swap with your tech level is like asking a squirrel to land a 747.


