Removing the top half of the fuse box in the bay?
Posted: Thu Sep 29, 2011 2:10 pm
So I undid all the clips, but then it looks like its attached to something by the fender.. any idea as to how I can loosen it?
2GN.ORG
The best source for the Second Generation Neon - Period.
https://forum.2gn.org/
Removing the top half of the fuse box in the bay?
Page 1 of 1
Posted: Thu Sep 29, 2011 2:31 pm
Do you have a pic of what you are talking about?
Posted: Thu Sep 29, 2011 2:47 pm
My guess is the PDC. He wants to separate the fuse holder half from the base.
You prolly need to completely remove it from the body. There are two screws, and a clip that goes through the fenderwell. The clip can be a pita to remove with out it breaking.
Patience and some prying with a screwdriver will eventually get it out. Or remove the fender liner to get at it. Yeah, I thought not.
The part in the top of the picture.
Then you will need to cut/remove the tie for the wire bundles to get it apart.
If you want to remove any of the terminal shoes, you need to pull the locks out. Then use a pick to release the tab. Don't have a pic of the slide locks.
Top half off. Ignore the arrow.
You prolly need to completely remove it from the body. There are two screws, and a clip that goes through the fenderwell. The clip can be a pita to remove with out it breaking.
Patience and some prying with a screwdriver will eventually get it out. Or remove the fender liner to get at it. Yeah, I thought not.
The part in the top of the picture.
Then you will need to cut/remove the tie for the wire bundles to get it apart.
If you want to remove any of the terminal shoes, you need to pull the locks out. Then use a pick to release the tab. Don't have a pic of the slide locks.
Top half off. Ignore the arrow.
Posted: Thu Sep 29, 2011 2:49 pm
Posted: Thu Sep 29, 2011 3:10 pm
Yeah thats what I ment Bill, thanks. I guess I'll just have to pry it out somehow