2 bin radio problems
2 bin radio problems
hey guys so i bought a stereo the other day and when i was going to install it, i had the unfortunate news of knowing that tmy car is a 2 bin. anyone ever done an install with a 1 bin on a 2 bin car?
Re: 2 bin radio problems
Wrong section, but you can buy an adapter kit at any type of auto store. Look in the audio section, walmart carries them as well.Areszona wrote: hey guys so i bought a stereo the other day and when i was going to install it, i had the unfortunate news of knowing that tmy car is a 2 bin. anyone ever done an install with a 1 bin on a 2 bin car?
@ jenni: LOL
second it is din as in the height of the radio correct? not Bin...
or are you talking about the connector into the radio?
the connector you should be buying a connector adapter to wire it in anyways and most that you buy will be an adapter for any of the 00-05 models.
second it is din as in the height of the radio correct? not Bin...
or are you talking about the connector into the radio?
the connector you should be buying a connector adapter to wire it in anyways and most that you buy will be an adapter for any of the 00-05 models.
2003 neon se crashed
1998 neon highline Sold
2005 neon sxtSold
2017 Volkswagen CC Rline Exec. 2.0t
"Sorry you are so scared of a possible mechanical problem that you will drive an ugly transportation appliance. I'll keep living a colorful life." -some guy about a camry
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
If the stereo is aftermarket, than any generic wiring adapter will work, you just have to solder it to the radio's pigtail. Or you can crimp connect it if you don't have a soldering iron. Not as nice, but it will work.
Most are color matched, so it is pretty simple.
If you are installing an '02 - newer Chrysler PCI bus radio, then you will need to get a single connector adapter. You can find them on ebay, or cut one from a JY car. You will need to splice it into the current harness.
oem reverse harness
Most are color matched, so it is pretty simple.
If you are installing an '02 - newer Chrysler PCI bus radio, then you will need to get a single connector adapter. You can find them on ebay, or cut one from a JY car. You will need to splice it into the current harness.
oem reverse harness
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
In Europe you can buy dodge to din adapters.
No soldering or crimping or whatever.
http://www.amazon.de/CHRYSLER-Radioadap ... B009EONTOM
No soldering or crimping or whatever.
http://www.amazon.de/CHRYSLER-Radioadap ... B009EONTOM