It brings:
-4 Sideskirts
-4 Flat "hooks"
-Bag of screws
-Instructions
Heres a pic of the hooks. You can also see my antenna delete plug
First:
Jack up the car and remove both front and rear tires for more room. Remove the front splash shield.
Follow the measurements that you need to take as far as were to place the hook on the car and screw them on
After screwing both front and rear hooks, place t he skirts and clip them in. This will secure the top half of the skirts, or you can use 3M double sided tape. or Both. Screw in the rear part of the skirt to the rear fender border, and the front to the front fender border. My front holes matched up to my aftermarkets not sure if stocks will.
Once the top half and corners are screw, screw the other 7mm bolts under the car to secure the skirts from the bottom.
After a good 1 hour while taking your time this is the final product.
All the holes are not pre-drilled on the car. You do not need to drill before, no need to. DO the measurements, do not skip and just place the hooks, they need to be were they go for better support.
GOOD LUCK
PS: If you like your front splash shields you will have to cut the "mud slap" thingy to fit the front of the skirts, like this:
I cut it with a normal dremo
excellent
Sam-I-Am
