How to: kicker subwoofer - plug

Post Reply
User avatar
2GN Member
Posts: 661
Joined: Sun Jun 28, 2009 3:06 pm
Location: Germany

How to: kicker subwoofer - plug

Post by Gnuserup » Sat Apr 23, 2011 9:48 am

If someone of you get his hands on a kicker subwoofer but is still missing
the plug - try to find a <2003 2nd-gen and take the (black) plug at the
trunk which connects the lid - it is the same ;)




*** *** *** *** *** *** *** ***


+ and ground for powering the amp of the woofer,
+ and ground to both to each speaker (so 4 wires in total)

Usually you have adaptorplugs for that to the speakers, but if you get the parts used, you will probably get the woofer without anything else

I connected mine as follows

Woofers plug:

Pin 1 red = + vom Radio
Pin2 green = speaker left (drivers side) brown/yellow
Pin 3 brown/red = speaker left brown/ blue
Pin 4 violett = speaker right blue/ white
Pin 5 brown/red = speaker right blue/ orange
Pin 6 black = ground

IIRC + from radio has always power - so be careful.

Post Reply

Return to “HT Electrical”