How-To: Forever Fix RICER FLASH!
Halfway up the page you will see Kyle asked the same question about a year and a half ago...Sykora wrote:umm what is Ricer Flash?
krc21 wrote:what is a ricer flash? sorry noob here
And now I'm going to do this modracer12306 wrote:A post from this threadNiteHawk wrote:ricer flash is the fast flashing you get when you replace front or rear turn signal incandecent bulbs with LED's....(or if you have a dead bulb).
If I could just figure out how to meld the Outback and the Neon into one car...
THANK YOU for posting that pic !!ZeroChad wrote:Here's a picture of my modified relay.
As you can see, the trace you need to interrupt is to the upper left of the 8pin chip.
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-
- 2GN Member
- Posts: 4137
- Joined: Sat Mar 22, 2008 1:56 am
- Location: Cumberland R.I.
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Right click, Save Picture as.....N30N wrote:
please dont delete your photobucket pics.lol
As for a whole how-to w/pics, just copy and paste the enire post into Word or similiar. Then save it so you have it.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2009 Gold Contributor
- Posts: 3165
- Joined: Sat Sep 01, 2007 11:08 pm
- Location: Austin, Tx
- Contact:
Thanks! look at this thread http://www.srtforums.com/forums/f75/how ... bs-311591/
Awesome Info. Thanks again !!ZeroChad wrote:Thanks! look at this thread http://www.srtforums.com/forums/f75/how ... bs-311591/
- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm
Official "I'm Going to Drive My Neon till it Dies" Club #000009
Has it been confirmed that the 00 and 01 relays are different than the 02 and up relays?NickKo wrote:THANK YOU for posting that pic !!ZeroChad wrote:Here's a picture of my modified relay.
As you can see, the trace you need to interrupt is to the upper left of the 8pin chip.
- Nick
Official "I'm Going to Drive My Neon till it Dies" Club #000036 <--- Done
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Read posts 13 and 24supermike wrote:Bummer. Seems like us '00s usually get the short end of the stick.ZeroChad wrote:Yeah, I believe its just the 00 relays.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
- Swordfish2Cowboy
- 2009 Silver Contributor
- Posts: 2693
- Joined: Sat Aug 25, 2007 7:06 am
- Location: Sandusky, Ohio
I'mma have to do that. Because.... I don't wanna just hack into stuff. I might need that later. And this way seems more professional. AND... Just cause.LilSparkPlug wrote:Just change out the capacitor in your relay to one with a higher uF like I did with my relay. It's really quite easy to do and this fix won't help you with those boards...you'll still blink way too fast.
thanks for the info!!!
- Custom or Nuthin -
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
-My SRT4 swap project log-
viewtopic.php?p=923967#923967
-My 2nd gen progress log-
viewtopic.php?t=52665&highlight=
-My 1st gen project log-
http://forums.neons.org/viewtopic.php?f ... 7#p3090897
Thanks for the great info, this is probably the easiest way to stop the ricer flashing.
I did however discover that if I have my parking/headlights turned on and I put on my right blinker it just stays solid and doesn't blink. But if I don't have my lights on and I signal then it works fine. Did anyone else run into this problem?
I did however discover that if I have my parking/headlights turned on and I put on my right blinker it just stays solid and doesn't blink. But if I don't have my lights on and I signal then it works fine. Did anyone else run into this problem?
I am having that problem (almost), but I don't think it's the flasher mod causing it.
On my car...lights off, everything works. Lights on, flashers work, left turn signal stays solid, right turns signal works in front, solid in rear.
From what I can tell so far, the MFS is going bad. Pretty common for our cars.
On my car...lights off, everything works. Lights on, flashers work, left turn signal stays solid, right turns signal works in front, solid in rear.
From what I can tell so far, the MFS is going bad. Pretty common for our cars.
If I could just figure out how to meld the Outback and the Neon into one car...
-
- Junior Admin
- Posts: 20306
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Had a similar problem on the 1gn. (without the flasher mod) Took the MFS apart, and cleaned everything, fixed the turn cancel spring, and it seems OK so far.
Do not take the MFS apart on either version unless you have tons of patience, and are creative at getting things in their place to reassemble it. On 1gn's, the tricky part is getting the high/low beam switch back in. If you don't get it right, you have no headlights.
Do not take the MFS apart on either version unless you have tons of patience, and are creative at getting things in their place to reassemble it. On 1gn's, the tricky part is getting the high/low beam switch back in. If you don't get it right, you have no headlights.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Update on the turn-signals-not-working-with-the-headlamps-on-problem.
I bought a MFS off Mike. His was a 2005 with around 20K on it. Turn signals still acted the same. Looks like the flasher is to blame.
So I did some more digging. I found a flasher by Grote that is made for LEDs. Great! Well, not so much. T/S worked, but as soon as I turned on the 4 ways, it buzzed and died. Blew the hazzard fuse under the hood as well.
I'm hoping it is just a case of a bad relay. As it is now I have no turn signals when my lights are on. Oh, and I am running only LEDs in my car now. 315 on the outside alone.
I bought a MFS off Mike. His was a 2005 with around 20K on it. Turn signals still acted the same. Looks like the flasher is to blame.
So I did some more digging. I found a flasher by Grote that is made for LEDs. Great! Well, not so much. T/S worked, but as soon as I turned on the 4 ways, it buzzed and died. Blew the hazzard fuse under the hood as well.
I'm hoping it is just a case of a bad relay. As it is now I have no turn signals when my lights are on. Oh, and I am running only LEDs in my car now. 315 on the outside alone.
If I could just figure out how to meld the Outback and the Neon into one car...
the only relay that will work in the MFS is the one that comes with our cars........
as far as why turn signals dont always work.......its because there's not enough load on the circuit to register in the relay...my car's left turn signal would half work most of the time because the led bulb in my gauge cluster died.....apparently that 1/2W was enough to make the turn signals not work anymore..... i have since put normal bulbs back in my headlight turn signals and the problem has disappeared.....for some reason our cars just dont like ALL led setups...
as far as why turn signals dont always work.......its because there's not enough load on the circuit to register in the relay...my car's left turn signal would half work most of the time because the led bulb in my gauge cluster died.....apparently that 1/2W was enough to make the turn signals not work anymore..... i have since put normal bulbs back in my headlight turn signals and the problem has disappeared.....for some reason our cars just dont like ALL led setups...
Matt Cresto
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.