hmm some nice rotas will they fit tho??

ragek23 · Post by **ragek23** » Mon Mar 02, 2009 8:42 pm

http://www.racinglab.com/rowhto1.html

http://us.st12.yimg.com/us.st.yimg.com/ ... 9_13390575

INVUJerry · Post by **INVUJerry** » Mon Mar 02, 2009 8:48 pm

48 offset, I'm gonna say no.

sidepipe87 · Post by **sidepipe87** » Mon Mar 02, 2009 9:30 pm

Nope. I wanted those too. That offset is way too extreme though. Those are for a Subaru.

ragek23 · Post by **ragek23** » Mon Mar 02, 2009 9:53 pm

Really?? hmm SO is it just that they will hit the stock struts or what?

cuz I have a coilover kit

INVUJerry · Post by **INVUJerry** » Mon Mar 02, 2009 10:08 pm

http://www.wheelsmaster.com/rt_specs.jsp

They're just going to be too far into the wheel well to work, put all the specs into that machine, and put the stock wheel spec on the other side. What you need to worry about is back spacing. A 7" wide wheel with a 35 offset is coming close to the strut body itself, not just the spring perch.

ragek23 · Post by **ragek23** » Mon Mar 02, 2009 10:22 pm

ok thanks!

bone-yard-racing · Post by **bone-yard-racing** » Mon Mar 02, 2009 10:47 pm

+40 offset 7" wheels come to about 1/8" of hitting the strut body. 48s will hit

04R/T · Post by **04R/T** » Tue Mar 03, 2009 12:49 am

Even if they were the correct offset they still wouldn't fit, the hub bore is 56.1

04R/T · Post by **04R/T** » Tue Mar 03, 2009 1:15 am

About a week ago I was checking e bay for Rotas and came across some Slipstreams in 16x8 with the correct bolt pattern but the wrong offset. I contacted the company and asked if they had them in the correct size, they didn't, but they sent me an inventory list and said if I see anything on it I like to contact them.

I found this on there: TORQUE 1780 35 5X100 57.1 GM 8.00.

It's saying that they have 8 Torques in inventory, 17x8, 5x100 bolt pattern with 35 offset and 57.1 hub bore (don't even need hub rings) in gun metal color.

Here's the complete inventory they sent me.

http://www.rotawheel.com/AVAILABILITY.htm

The companies name on e bay is Rushkits

sidepipe87 · Post by **sidepipe87** » Tue Mar 03, 2009 1:35 am

Hmmm I don't see that anywhere on the list. I only see 48 offset? I also looked at Ruskits on ebay because I was looking for Torques and Grids. Couldn't find either in the right offsets. I also checked out

http://www.machiii.net/Rota_wheels.html

and

http://www.18racing.com/wheels.html

from suggestions here, but no dice on those sites either. Bummer

ragek23 · Post by **ragek23** » Tue Mar 03, 2009 4:33 pm

04R/T wrote:About a week ago I was checking e bay for Rotas and came across some Slipstreams in 16x8 with the correct bolt pattern but the wrong offset. I contacted the company and asked if they had them in the correct size, they didn't, but they sent me an inventory list and said if I see anything on it I like to contact them.

I found this on there: TORQUE 1780 35 5X100 57.1 GM 8.00.

It's saying that they have 8 Torques in inventory, 17x8, 5x100 bolt pattern with 35 offset and 57.1 hub bore (don't even need hub rings) in gun metal color.

Here's the complete inventory they sent me.

http://www.rotawheel.com/AVAILABILITY.htm

The companies name on e bay is Rushkits

I found them thanks!