diamond racing wheels

Anything that has to do with wheels and tires goes here. Will a wheel fit? Ask it here. Will a tire fit your wheel? Ask it here.
Post Reply
2GN Member
Posts: 74
Joined: Tue Apr 26, 2011 1:14 pm

diamond racing wheels

Post by kneeon » Sun Sep 30, 2012 3:18 pm

I was thinking of getting the pro series style but im wondering how flush the offset and backspacing would be on a set of 15x7 +12 offset 5" backspacing and the 15x8 same everything else....i have a 01 neon with a rt front & rear bumpers no skirts

User avatar
2GN Member
Posts: 548
Joined: Wed May 12, 2004 2:03 am
Location: Kent, Washington

Post by JeremyJ » Wed Nov 14, 2012 1:26 pm

I hope you aren't into going fast. Steel wheels are much heavier than aluminum and they bend more easily (I'm speaking from experience). I suggest skipping these and finding something better in aluminum.
2002 base -> 2005 SRT ACR -> 1996 sedan -> 1999 R/T coupe -> 2002 R/T


2GN Member
Posts: 312
Joined: Sat Aug 14, 2010 5:30 pm
Location: Lisbon Falls, ME

Post by wickedgood4684 » Fri Nov 16, 2012 7:55 am

Even though you may be speaking from experience, Aluminum wheels are much more likely to bend then steel wheels. Steel is much much strong than Aluminum and can withstand greater pressure before bending. This is why Circle track cars run steel wheels. Its safer and they are less likely to bend or warp.
SRT-4 Challenge series
Season 1 Champion: gotheframe/tim and corey
Season 2 Champion: Greasydeuce/Dmonday
Winter Series:
Drivers Chamion: Neon Nick/Squat BIG
Team Champions: Team Acura: miniMench & wicked221
Rookie of the year: Patriot 01/xxPATRIOT 01xx

Post Reply

Return to “Wheels / Tires”