srt4 turbo on 2002 r/t

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
2002r/t
n00b
Posts: 12
Joined: Wed Dec 13, 2006 9:28 pm

srt4 turbo on 2002 r/t

Post by 2002r/t » Thu Dec 14, 2006 8:09 pm

what is all thats needed to get this done? is it possible with the r/t engine? is it worth all the trouble and money? any help would be much appreciated!

-Rob

User avatar
authirish
2GN Member
Posts: 81
Joined: Sat Sep 23, 2006 9:12 pm
Location: Hollywood, FL

Post by authirish » Thu Dec 14, 2006 8:28 pm

very possible i am running it on my 02 ACR and there are a few guys on rt's too. you can runn 5-8 lbs on the stock bottom end with proper fuel setup.

here's a basic list:
matdog mag to srt adapter
srt turbofold
srt FMIC
intercooler pipes/ bov
walbro 255 fuel pump, srt injectors
rrfpr
some way to trick the computer to not see boost..aka mapclamp or go piggyback/standalone i would say MS
misc lines for the water and oil feeds/return.
tapped oilpan for return
boost gauge
afr gauge

i might have forgotten something..

Def worth the effort if you want a bit more power. you can get the setup for around $1000 if you look around.

Murph
2002 ACR with srt turbo, MSnSpark standalone, 18 lbs of boost daily

User avatar
LCPLPunk
2GN Member
Posts: 1238
Joined: Sat May 14, 2005 10:28 pm
Location: Central Florida
Contact:

Post by LCPLPunk » Fri Dec 15, 2006 10:35 am

authir, are u boosting 18 psi on a stock bottom end?
2001 Neon R/T
Deyeme Motor Mounts, Booger Bushings, JohnnyMopar Cradle Bushings, SRT Silver shift knob, Maddog STS, SRT Rear Seat, K&N WAI, Magnecore Wires, Mobil 1 Full Synthetic Oil, Coil pack heat shield
""The bitterest tears shed over graves are for words left unsaid and deeds left undone" - Harriet Beecher Stowe"

Srt4Me03
2GN Member
Posts: 43
Joined: Fri Sep 22, 2006 10:15 am
Location: Hotter then hell FLORIDA !!

Post by Srt4Me03 » Fri Dec 15, 2006 10:39 am

LCPLPunk wrote:authir, are u boosting 18 psi on a stock bottom end?
Its not a stock bottom end.... Eagle H-rods with Wiseco 8.5:1 pistons.. stock crank though.

Post Reply

Return to “General 2nd Gen Discussion”