Allied Composites - Back and here to stay :)
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
Allied Composites - Back and here to stay :)
Hey guys... after the original fuck-ups, i just went away and got everything set up and organized for an eventual return... All of the original orders that i was backed up with have been filled, minus a few wings and a triple pod for Matt... I've been building up inventory of everything else i make however, and i'm ready to slowly re-open the floodgates to you guys...
Please check out my new website... almost everything is up and ready, except for some sections that still need some updates or more pictures...
The May Specials page will be activated first... you will be able to order the Exterior C Pillars and Sidemarkers first, and once everything is ready, all the other links will be active... I have about 10 sets of each of the C pillars and sidemarkers, so delivery would be right away. Please check back in a day or two for an option to BUY, directly from the website. (NOTE:at the moment, all the prices on the website are in CANADIAN dollars, even in the US section...)
www.alliedcomposites.com
Thanks guys
George
Please check out my new website... almost everything is up and ready, except for some sections that still need some updates or more pictures...
The May Specials page will be activated first... you will be able to order the Exterior C Pillars and Sidemarkers first, and once everything is ready, all the other links will be active... I have about 10 sets of each of the C pillars and sidemarkers, so delivery would be right away. Please check back in a day or two for an option to BUY, directly from the website. (NOTE:at the moment, all the prices on the website are in CANADIAN dollars, even in the US section...)
www.alliedcomposites.com
Thanks guys
George
Last edited by rice_eater on Sat Jun 16, 2007 10:34 pm, edited 1 time in total.
-
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
no links, but i did get all of my carbon except for a 3pod pillar set and the fiberglass wings. george says that a box of wings were shipped, so we'll see when those show up
Matt Cresto
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
-
- 2GN Member
- Posts: 1267
- Joined: Mon Aug 08, 2005 8:23 pm
- Location: Banff, Alberta
- BlackRoseRacing
- 2009 Platinum Contributor
- Posts: 12737
- Joined: Sat Dec 25, 2004 8:58 am
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
http://alliedcomposites.com/george/website/contact.htmlDiablo0 wrote:http://forum.2gn.org/viewtopic.php?t=19915
can also be accessed from the main page on my website. All my contact info, and business registration is there
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
i think i made at least 20-30 sets of exterior C pillars off of the plastic ones you sent meRiddler wrote:Good to see you back....
Riddler
-
- 2GN Member
- Posts: 1267
- Joined: Mon Aug 08, 2005 8:23 pm
- Location: Banff, Alberta
For sure man. If we can find used trunk for the right price, then i have no problems splitting the cost with you on it. If I had a garage to keep my car in, then i'd have no problems taking the trunk off, but unfortunately I don't. Worst case senario, i could drop my car off at your shop, and then catch a ride back into townrice_eater wrote:not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
so you want an overlay then, or would you rather have yours or a stocker laminated?
just wondering... if you have a yard, i have those fiberglass trunks that i made last year, so i could lend you one so you dont get rain in the car or whatever... they wont lock or bolt in, but they wont let water in... it's an idea... one dude was gonna sell me his for 75, but he was in BC....
parking it at my new place wont work, i dont have any room for it there unfortunately
just wondering... if you have a yard, i have those fiberglass trunks that i made last year, so i could lend you one so you dont get rain in the car or whatever... they wont lock or bolt in, but they wont let water in... it's an idea... one dude was gonna sell me his for 75, but he was in BC....
parking it at my new place wont work, i dont have any room for it there unfortunately
-
- 2GN Member
- Posts: 1267
- Joined: Mon Aug 08, 2005 8:23 pm
- Location: Banff, Alberta
-
- 2GN Member
- Posts: 4225
- Joined: Thu Jul 21, 2005 9:09 pm
- Location: Duluth, MN
- Contact:
- [DJ]Tomski
- 2GN Member
- Posts: 729
- Joined: Mon Feb 13, 2006 2:10 pm
- Location: IL
Makes me wish I would of included some CF parts in the sale.rice_eater wrote:not really at the moment... i've been trying to find one at a local jyard, but the ones i found they wanted an arm and a leg for (100+) i'm hoping to be able to snap one up off one of the SRT guys locally, when they upgrade to CF....sullygully wrote:^ Are you ready to start making Cf Trunk overlays again? I've wanted one for so long
but you're local to me, so maybe if you have the car parked for about a week we can figure something out? I dont mind driving up to the mountains to meet you, i like taking cruises going that way... maybe in Canmore or by that Exshaw Quarry?
i think i made at least 20-30 sets of exterior C pillars off of the plastic ones you sent meRiddler wrote:Good to see you back....
Riddler
Riddler
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
sullygully has brought his trunk to me to have it laminated, and has got it back already and on his car for a show... he's come over and seen my whole "operation", so feel free to ask him...
my local srt owners are really happy with what i've delivered for them so far and are keeping me super busy, so as i get installed pictures from them they'll be up on the website under members rides, and hopefully the long list of happy people will put any concerns asside...
i have stock now of all the old things i make (less triple pods, glove box doors, and center arm rests), and i've made a whole bunch of new smurf because people have been screaming for it...
rad shroud
b pillars
exhaust surrounds
foglight deletes
my suggestion for a smooth and fast transaction, is to please check with me on availability before ordering, because like i said, some items i dont keep stock off yet, while others i have tons of... as long as you're asking for something that i'm already making, i more than likely have it in stock and can ship it out the next day.... make your own decissions, but i think despite my flaws, the fact that eventually all orders have been filled, and that i just finished making all the last things you guys requested (exterior Bs, rad shourds, and exhaust surrounds), i think that should still count for something angel12
take a look on the website, i've been updating some of the sections
www.alliedcomposites.com
my local srt owners are really happy with what i've delivered for them so far and are keeping me super busy, so as i get installed pictures from them they'll be up on the website under members rides, and hopefully the long list of happy people will put any concerns asside...
i have stock now of all the old things i make (less triple pods, glove box doors, and center arm rests), and i've made a whole bunch of new smurf because people have been screaming for it...
rad shroud
b pillars
exhaust surrounds
foglight deletes
my suggestion for a smooth and fast transaction, is to please check with me on availability before ordering, because like i said, some items i dont keep stock off yet, while others i have tons of... as long as you're asking for something that i'm already making, i more than likely have it in stock and can ship it out the next day.... make your own decissions, but i think despite my flaws, the fact that eventually all orders have been filled, and that i just finished making all the last things you guys requested (exterior Bs, rad shourds, and exhaust surrounds), i think that should still count for something angel12
take a look on the website, i've been updating some of the sections
www.alliedcomposites.com
Last edited by rice_eater on Sun Jun 17, 2007 12:49 am, edited 5 times in total.
do the rad shrouds work on the reg neons as well? I was thinkin about making one of those but if yours works then id rather go with that.
-Derek
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
yeah I thought so as well, but who knows.
-Derek
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
|Donate to 2gn|Feedback || OB's | GozziFab | All Business |
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
everything you see here is unspoken for.... if you see something you like, it can ship out tomorrow.... (if anyone is wondering, that is dust on some of the parts)glasswars wrote:Anyone order from him yet? I wanna order the C pillar and side marker overlay special but I'm sooo skeptical...
in all honesty i haven't touched it, but i will pull the bumper off in the morning and i'll get to it... i'll install one of the rad shrouds as well, and take some pictures for you guys...03sxt wrote:How's my badge coming along?
Wow!! You have been busy!!!!
Joe
team liviD
2K5 Black SRT-4
2K2 Black R/T..thats right I'm bringing her back!!
2K6 Red Charger R/T
ECN v2.0 IS HERE.....
Support 2gn! viewtopic.php?t=39019
team liviD
2K5 Black SRT-4
2K2 Black R/T..thats right I'm bringing her back!!
2K6 Red Charger R/T
ECN v2.0 IS HERE.....
Support 2gn! viewtopic.php?t=39019
-
- 2GN Member
- Posts: 1267
- Joined: Mon Aug 08, 2005 8:23 pm
- Location: Banff, Alberta
Just to set the record straight, I can fully vouche for Georges quality of work, and is a great guy to deal with. I regreted not borrowing that rad shroud for the show, as i decided to show my engine after all. But it turns out i didn't need it, as I ended up winning "BEST DOMESTIC".
I'll post some pics of the trunk on the car as soon as i can.
I'll post some pics of the trunk on the car as soon as i can.
-
- 2GN Member
- Posts: 1521
- Joined: Tue Jun 28, 2005 1:25 pm
- Location: calgary
maybe on a one off basis, but i took them off my website... i'd kinda rather notEclecticBlue wrote:George, are you going to make the PVO/AVS style rear spoiler? I got one from CBD and its such a POS I want one that fits properly and looks good without alot of blemishes!!
i thoght that was you.. i think you'll be happyglasswars wrote:I just ordered the C Pillar & side marker package..