CUDA STRIPES
CUDA STRIPES
hey anyone no where to get a cuda stripe kit without the neon or srt-4 words at the back just the stripes?
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
I got mine from www.revolution-motorsports.com you just select the option for them not having the PVO, Neon, AAR, etc. on them.
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12090
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
I am waiting on revo to send me samples of different silvers. The first time he forgot to send them out. the econd time they supposedly got lost in the mail. So third time is a charm right? I think the black on the silver is overdone so I am looking for a ghost effect where they barely show up.
08 Acura TL-S
23 Hyundai Elantra N
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12090
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12090
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
you can peel them off, but it may take a little while.....
one thing you might look into, is an eraser wheel, its literally a giant eraser...
it will remove all adhesive left behind without hurting your car... thats what the dealership used on my car when i had them pull the side molding...and my car's black, so you'de know right off if it hurt it at all.....
one thing you might look into, is an eraser wheel, its literally a giant eraser...
it will remove all adhesive left behind without hurting your car... thats what the dealership used on my car when i had them pull the side molding...and my car's black, so you'de know right off if it hurt it at all.....
Matt Cresto
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
Fueled By Matt
Fueling Your Passion
Fuel systems turbo kits and components, tuning, performance parts. Contact us for all of your performance needs.
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
-
- 2GN Member
- Posts: 166
- Joined: Sat May 12, 2007 2:05 am
- Location: Mississauga, Ontario, Canada
-
- 2GN Veteran
- Posts: 12206
- Joined: Thu Jan 10, 2008 4:49 pm
- Location: RI
Line it up with masking tape where you want it. Remember a large decal is going to go where it wants if you don't tell it. Wet the entire area underneath it and starting at the fender and working your way back, lay it out the way you want it. Peel the masking tape off. Leaving the paper on the decal, squeegee out all the bubbles. Use a heat gun to help you. Only after you are TOTALLY done removing bubbles, remove the cover paper. Then cut at the doors and fold in. I have a picture of this process somewhere.
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12090
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
-
- 2GN Member
- Posts: 682
- Joined: Fri Nov 16, 2007 10:34 pm
- Location: Wisconsin
hmm i wonder how my car will look with them.....
Feedback: viewtopic.php?t=48146
^^Click to see all of the offered products^^
Amsoil dealer. I can get you great prices on all amsoil products! send me a pm
^^Click to see all of the offered products^^
Amsoil dealer. I can get you great prices on all amsoil products! send me a pm
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
does anyone know how i can get a set made with SXT in the crest on the rear?? I emailed them a while ago and got no response.. Anyone have an updated email for them, maybe I emailed the wrong address. Also, which is a better choice gloss or flat black vinyl? Thanks!
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
-
- 2GN Member
- Posts: 166
- Joined: Sat May 12, 2007 2:05 am
- Location: Mississauga, Ontario, Canada
If you are going to get any black, you might as well stick with tradition and get flat black.sidepipe wrote:does anyone know how i can get a set made with SXT in the crest on the rear?? I emailed them a while ago and got no response.. Anyone have an updated email for them, maybe I emailed the wrong address. Also, which is a better choice gloss or flat black vinyl? Thanks!
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
I just wasn't sure how they hold up to the elements, waxing, etc.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
lol, ok. I just want to make sure. Now I just need to figure out what I want and get some money. I'm trying to get some money for a Thermal R&D axle back.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12090
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
- sidepipe87
- 2009 Silver Contributor
- Posts: 9516
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
yeah, they fail at answering emails too. I'd just buy what I want elsewhere If I could.
PM me for your 00+ PCM SKIM/VIN flashing needs. Neon PCMs Plus