(_SxXxT_) 7/15/13. The car runs

sxxxt · Post by **sxxxt** » Mon Jul 21, 2008 12:26 am

ok well some of you may no my car was broken into in june. well since the d bag did damage to the outside i decided to repaint my car. but a lot of things are going to change. all of these pictures right now are of the car as it sits right now. once i get all of the exterior pieces ill begine the tear down. i hope to be done befor september. the exteior isnt the only thing that is going to change. so "here we, Go!"

the audio set up right now is 1 2500 watt amp going to my subs, a 1200 watt amp going to my 6x9's Jand a 400 going to my 6.5 component. thise entire set up is going to change also

next is my srt-4 gauge cluster i just got, its going to be redon also, you may have seen my all white LED cluster well im doin it to this one too. bye bye green

here is my HID conversion kit that is freakin amazing. its the 6000k stayin with the white.

and now for he biggest thing that is going to change the exterior

these are items i have on order and items i will be ordering.

INTERIOR:
seats: need to order
steering wheel: complet
paint:
trunk foundation: Need to build
battery in trunk: need to order
amp rack: need to build
speaker box: need to build
subs: need to order
new gauges: need to order
door popper kit: complete
chrome ac knobs: complete

EXTERIOR:
Oem fenders: on
molded avs spoiler: done
taking off canards
fendeflares:MOLded

PERFORMANCE AND SUSPENSION:
tranny swap: complete
short shifter: complete
booger bushings: complete
srt shift boot: complete
bc coil overs: completed
udP: need to order
header: need to order

your gonna want to keep your eye on this

NiteHawk · Post by **NiteHawk** » Mon Jul 21, 2008 2:47 am

ill take that shaved trunk lid if you still have it

contagious18 · Post by **contagious18** » Mon Jul 21, 2008 4:10 am

cant wait to c dis done

bstc00 · Post by **bstc00** » Mon Jul 21, 2008 5:39 am

headers: need to order

i didnt know that you neons needed to heads headers

sxxxt · Post by **sxxxt** » Mon Jul 21, 2008 11:18 am

bstc00 wrote:
headers: need to order
i didnt know that you neons needed to heads headers

hahah i ment just one

trinity_rush2001 · Post by **trinity_rush2001** » Mon Jul 21, 2008 11:54 am

i wish u luck man....cant wait to see this beast when its done

slaw · Post by **slaw** » Tue Jul 22, 2008 5:42 pm

cant wait to see what u do to it now
one things for sure i know i wont be dissapointed, u do great work

blue demon02 · Post by **blue demon02** » Tue Jul 22, 2008 6:00 pm

NiteHawk wrote:ill take that shaved trunk lid if you still have it

Sorry that bad boy is mine.

sxxxt · Post by **sxxxt** » Wed Jul 23, 2008 12:55 pm

ok iv got all the parts i need and as of monday the tear down begins. heres the parts fitted. and black spray primar.
Oem fenders

Fender flare kit

AVS spoiler black primar

THe avs and rear fenderflare

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Jul 23, 2008 1:04 pm

oooo i'm excited to see those fender flares. i've always loved the looks of 'em

glasswars · Post by **glasswars** » Wed Jul 23, 2008 2:10 pm

Those flares are sick! Where did you get them?

NeonOn19s · Post by **NeonOn19s** » Wed Jul 23, 2008 6:58 pm

those look sick.. man i wish that i had those out on my neon.. i wouldn't have the issues with my 19s rubbin then

SOHCKing03 · Post by **SOHCKing03** » Wed Jul 23, 2008 6:59 pm

Yeah seriously I want those flares! Where did you get them?

-Brad

TheRandom1 · Post by **TheRandom1** » Wed Jul 23, 2008 7:53 pm

Damn, those flares are sick, I want them! It would let me run a set of wheels I really want!

sxxxt · Post by **sxxxt** » Sat Jul 26, 2008 12:19 am

heres the website that they come from. but i didnt pay that much.
http://www.grounddynamics.com/Templates ... lderId=449

TheRandom1 · Post by **TheRandom1** » Sat Jul 26, 2008 3:03 am

OMG! I like 'em, but not THAT much!

blue demon02 · Post by **blue demon02** » Sat Jul 26, 2008 3:30 pm

I thought about those for my car but I don't like how drastic the flare is. I think it would look 100 times better if the flare was more gradual. But I will reserve judgment until I see them molded in. Hurry up and get them done.

contagious18 · Post by **contagious18** » Tue Jul 29, 2008 3:32 pm

hey bro, have u gotten my pms

sxxxt · Post by **sxxxt** » Tue Aug 26, 2008 6:33 pm

ok its been about 4 weeks since iv posted anything but here are the updates

welded up the antana hole

heres the front fender flares screwed in ready to be molded

somethin that took me about a half a day to do

and a sweet picture i took when i was at a drag race, little shaky but still a good pic

supertrick_05 · Post by **supertrick_05** » Tue Aug 26, 2008 6:59 pm

Wow, those flares are gonna look great! You have impressed me so far with your work, and I'm definately looking forward to your updates on the car! I just hope you're going to get some better wheels to fill up the extra wide fenders

sxxxt · Post by **sxxxt** » Wed Aug 27, 2008 11:49 pm

my new screen, and the new bezel that is going to be one of a kind as u can tell the entire thing is primared. just a start on the bezel.

Ntyvirus1 · Post by **Ntyvirus1** » Thu Aug 28, 2008 5:12 pm

cant wait to see a finished product. unrelated, but thnx gain for the sanding/painting tips.

trinity_rush2001 · Post by **trinity_rush2001** » Fri Aug 29, 2008 2:02 am

hey that bezel looks familar lol

lookin good man

sxxxt · Post by **sxxxt** » Fri Aug 29, 2008 10:12 am

haha ya man urs looks pretty sweet, did you take off the ac over lay? if you did how did you take it off with out breaking it.

kornholio788 · Post by **kornholio788** » Fri Aug 29, 2008 10:22 am

sxxxt wrote:haha ya man urs looks pretty sweet, did you take off the ac over lay? if you did how did you take it off with out breaking it.

Very carefully. I got one of once in a jy just to see if it was possible. It is. Just take a razor and go slow. It is just glue holding it on. Just take your time and you will get it. Getting it started is the hardest part. After that it is easy. As it is like a plastic so it doesn't rip easily.

trinity_rush2001 · Post by **trinity_rush2001** » Fri Aug 29, 2008 11:31 am

^^^ what he said its is a task that must be done w/ patience (sp???)

Fuzzyneon · Post by **Fuzzyneon** » Mon Sep 01, 2008 2:51 pm

can someone make me one of those hvac bezels if so qp me a price!

TheRandom1 · Post by **TheRandom1** » Mon Sep 01, 2008 2:58 pm

sxxxt · Post by **sxxxt** » Mon Sep 01, 2008 10:59 pm

the thing about those bezels is you have to custom fit them to the radio you buy. you can just make universal ons then sell them. i would have to have the radio and make the cuts, then mold it around the radio. thats why no one sells them cuz its a custom thing. if that makes sense.

LowNSlow · Post by **LowNSlow** » Tue Sep 02, 2008 12:34 am

So you are getting more aggressive offset wheels to make up for the flares right?...