Part Number Request: Valve Cover Bolts

Post Reply
Izero
2GN Member
Posts: 600
Joined: Wed Jun 27, 2007 2:12 pm

Part Number Request: Valve Cover Bolts

Post by Izero » Sat May 03, 2008 9:45 pm

Hi guys i am looking for the part number for the Valve Cover Bolts.

They are the bolts that hold your valve cover to the head... any help would be much appreciated!!
Image

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun May 04, 2008 7:47 pm

4777 625AA ISOLATOR, Cylinder Head Cover, Grommet And Bolt $7.20 :shock: ! 10 required = $72.00 list, unless Dante can verify thats for all 10 for $7.20
Edit: I now know why I wire-wheeled my old ones and painted/reused them!
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

racer12306
Junior Admin
Posts: 16126
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Sun May 04, 2008 8:06 pm

Ouch. I bet it is each because it is for a grommet and bolt.

I would reuse the old ones, or head to a junkyard and find some there.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

Izero
2GN Member
Posts: 600
Joined: Wed Jun 27, 2007 2:12 pm

Post by Izero » Sun May 04, 2008 8:09 pm

wow.... good god..... $7.20 for one lil bolt?! jesus...where do i search for the part number btw? like what site can i put that part number into and see if its what i need...? also is there suppose to be a space between 4777 and 625AA or is one whole part # like this:

4777625AA.........?
Last edited by Izero on Sun May 04, 2008 8:19 pm, edited 1 time in total.
Image

racer12306
Junior Admin
Posts: 16126
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Sun May 04, 2008 8:11 pm

check www.moparsupercenter.com

i would put it in as one continuous number
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Sun May 04, 2008 10:57 pm

Hey there. Sorry I didn't respond sooner. But you have the info you need (thanks guys :thumbup: )

They are correct, part #4777625AA...MSRP 7.20 each. You need 10 :shock:

Not cheap at all. But that is the bolt and grommet together.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Mon May 05, 2008 12:26 pm

As far as looking up the numbers I downloaded the '01 parts PDF from this site. I don't think it is available on here anymore. I have the link to it on Diablo's server, but I don't feel comfortable posting it without his permission, as I don't know if it was pulled for legal reasons. Some of the numbers are outdated, but for the most part it is still a nice thing to have. If something can be saved to your computer, best download it while you can. :lol:
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

kbobob
2GN Member
Posts: 103
Joined: Tue Aug 17, 2004 8:21 pm

Post by kbobob » Wed Jan 07, 2009 10:42 pm

are these usuallly stocked or do you have to order...luckily i only need two for now......get more when i get to the yard for extras

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Jan 08, 2009 10:46 am

Depends on the dealer in your area. These aren't a common item for a dealer to carry in stock, but it shouldn't take more than a couple days to order them.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

kbobob
2GN Member
Posts: 103
Joined: Tue Aug 17, 2004 8:21 pm

Post by kbobob » Thu Jan 08, 2009 12:21 pm

$12.15 cdn each, 7-10 days to get.....lets just say,i will get to the yard quicker then this.

oh well

thanx for the part numbers again
2001 neon LE (sport appearance package) - 212,000kms - steel blue - my car
2001 Neon LE - Base 95,000kms - salsa red - moms car
2005 Dodge SX2.0 sport - 97,000kms - inferno red - fiances car

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Jan 08, 2009 2:11 pm

Ouch :(
If I could just figure out how to meld the Outback and the Neon into one car...

Image

MoparFreek
2GN Member
Posts: 68
Joined: Tue Mar 31, 2009 7:30 pm
Location: Ohio

Post by MoparFreek » Sat Oct 31, 2009 7:04 pm

Can you buy these individually or do you have to buy all 10?
04 SRT-4
02 SXT

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Sun Nov 01, 2009 6:33 pm

You can buy them individually, tho if the dealer has to order them they may have to buy whatever comes in a package, usually 5 or so. They may charge a little more as they will be stuck with inventory that they may not move for a while. I would ask the parts person how they are shipped, and see what kind of deal they will give you if they ship in multiples. Of course if you would have to buy all 10, then screw it.

But sometimes if they know you are willing to save them some operating cost, they will help you out. The ones that don't, well let them eat it. The way I see it, selling me stuff under MSRP is better than having capitol tied up in inventory that they may never move.
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

MoparFreek
2GN Member
Posts: 68
Joined: Tue Mar 31, 2009 7:30 pm
Location: Ohio

Post by MoparFreek » Sun Nov 01, 2009 7:54 pm

I was actually able to find some bolts at the parts store that work. I broke a bolt off in the head and after I got it out I removed the sleeve from the factory bolt with some heat and used it on the new bolt.

Image


Image
04 SRT-4
02 SXT

User avatar
nerox
2011 Silver Contributor
Posts: 939
Joined: Sun Dec 20, 2009 10:51 am
Location: United Kingdom

Post by nerox » Thu Mar 08, 2012 2:16 pm

can you buy just the grommets on their own?
Official "I'm gonna drive my Neon until it dies" Club Member UK#1

Image

occasional demons
Junior Admin
Posts: 20306
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Thu Mar 08, 2012 3:14 pm

They come with most gasket kits, but only with the bolt from the dealer.
Pic:
http://contentinfo.autozone.com/znetcs/ ... R/image/2/
Bill
Olha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
2021 Forester

Post Reply

Return to “PN Engine”