Part Number Request: Front SRT4 Swaybar bushings

ragek23 · Post by **ragek23** » Thu Aug 12, 2010 9:29 pm

as it says I need the PN for the front swaybar bushings. I also need the clamp back for them.

Post by **occasional demons** » Thu Aug 12, 2010 10:33 pm

4656513AA CLAMP, Stabilizer Bar

5272506AA CUSHION, Sway Eliminator [SDE] [SDK] [SDF] [SDC

or

5272507AA CUSHION, Sway Eliminator [SDX]

Not sure which.

ragek23 · Post by **ragek23** » Sat Aug 14, 2010 12:28 am

thanks!

smiley · Post by **smiley** » Mon Sep 13, 2010 5:49 pm

Now is one of those part numbers for the brackets that hold the sway bars up?

Post by **occasional demons** » Mon Sep 13, 2010 10:33 pm

Nope.

4656513AA CLAMP, Stabilizer Bar 2 required $5.10

6102067AA BOLT Front Sway Bar Clamp bolt. 4 required $0.60

smiley · Post by **smiley** » Mon Sep 13, 2010 10:40 pm

thanks little confused though which ones for which, is the $5.10 one for the back? and the $.60 one for the front?

Post by **occasional demons** » Mon Sep 13, 2010 10:57 pm

Oops, my bad, I did not see the PN in my original post.

It is for the front sway bar.
Edit:
Bolts are 60 cents

smiley · Post by **smiley** » Mon Sep 13, 2010 11:11 pm

right on, what about the rear?

Post by **occasional demons** » Mon Sep 13, 2010 11:23 pm

Rear clamps

4656478AB 1 Right
4656479AB 1 Left

$6.75 each

bolts
6506203AA 4 $2.50

smiley · Post by **smiley** » Mon Sep 13, 2010 11:25 pm

Awesome, and one last question, u just told me two different part numbers for the back, and one part number for the front, guessing just order two of the same ones for the front?

Post by **occasional demons** » Mon Sep 13, 2010 11:29 pm

Correct. The front are not left or right hand specific. Apparently the rear ones are.

smiley · Post by **smiley** » Mon Sep 13, 2010 11:31 pm

weird, well I appreciate it man

Post by **occasional demons** » Mon Sep 13, 2010 11:35 pm

Thinking back to when I was swapping sways, I think the rear ones angle inward, so they would be specific to each side.

Or my mind might just be making shit up as it goes.

smiley · Post by **smiley** » Mon Sep 13, 2010 11:36 pm

I'm sure I can figure it out lol

sidepipe87 · Post by **sidepipe87** » Mon Sep 13, 2010 11:43 pm

I don't think they are side specific, but maybe. I have Hotchkis ones and they definitely aren't. But just an FYI, the rear only require the purchase of 3 bolts as I saw when I did mine because that black box maybe for the EVAP system is mounted in one of the holes and you just reuse that bolt.