Please lock this thread.

Midnight_Rider · Post by **Midnight_Rider** » Sat Dec 18, 2010 6:28 am

Sounds good so far (at least you have real mods

).

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 6:49 am

Thanx Gramps...

I want it to be show worthy but not overdo it.

gtxtreme19 · Post by **gtxtreme19** » Sat Dec 18, 2010 8:25 am

Well the ideas are good but I'm going to tell you what I told Gramps. Moar pictarz NOW!
...or something along those lines

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 9:09 am

gtxtreme19 wrote:Well the ideas are good but I'm going to tell you what I told Gramps. Moar pictarz NOW!
...or something along those lines

I will get some pictures sometime today. Errands are first on Saturdays.

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 12:07 pm

My newest acquisition.... Stainless gauge bezel

2005.Neon.SXT · Post by **2005.Neon.SXT** » Sat Dec 18, 2010 2:54 pm

Looks like a good start so far man. Bezel looks great too! Probably the same person that mine came from:

Post up more pics!

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 3:05 pm

Did you get it from Ferreus Industries on e-bay? And yeah I will definitly get some pics as soon as the battery on my digital camera gets charged.

2005.Neon.SXT · Post by **2005.Neon.SXT** » Sat Dec 18, 2010 7:44 pm

C1DoG wrote:Did you get it from Ferreus Industries on e-bay? And yeah I will definitly get some pics as soon as the battery on my digital camera gets charged.

It was preinstalled on a previous cluster I bought from a member here (krc21). So I have no idea lol...

Can't wait for the pics

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 9:29 pm

C1DoG · Post by **C1DoG** » Sat Dec 18, 2010 10:29 pm

Y'all wanted pics so here goes...

The air/oil seperators along with the CAI

The pyle amp powering the dual kicker 12 inch in the trunk. The custom sub box and subs can be seen in my garage.

The Pioneer bluethooth headunit

The 6 disc changer to replace the stock one

Newest arrival the stainless gauge bezel that was installed this afternoon

The a/t shift knob

And my license plate that I grabbed off my truck before it got sold today.

I am pretty sure most have seen pics of clear third brake lights and so on... so I will spare those details. Unless y'all really want pics.

LilSparkPlug · Post by **LilSparkPlug** » Sun Dec 19, 2010 8:50 am

We ALWAYS want pics

Nice progress so far!

C1DoG · Post by **C1DoG** » Sun Dec 19, 2010 9:38 am

Thanx!

C1DoG · Post by **C1DoG** » Sun Dec 19, 2010 1:50 pm

More pics....

Euro red taillights and clear third brake light.

And then the sides without the molding, which I am rather pleased with. After the few slices in my finger and the blister on my thumb that hurt like a

.

C1DoG · Post by **C1DoG** » Mon Dec 20, 2010 9:35 pm

Put my personalized plate on my neon today after reporting my truck as sold and transferring the plate to the neon.

C1DoG · Post by **C1DoG** » Tue Dec 21, 2010 10:10 pm

Looks like exhaust is next. Ordered a magnaflow camaro muffler and stainless tips yesterday. Will probably be installed after the 1st of the year.

Maybe next week I will get out and get some better pics of the neon.

LilSparkPlug · Post by **LilSparkPlug** » Wed Dec 22, 2010 9:30 am

Taking off the moldings makes such a big difference it's insane. Really cleans up the side of the car. What does the plate stand for? If it's obvious please excuse my retardedness

C1DoG · Post by **C1DoG** » Wed Dec 22, 2010 9:55 am

Well... The Plate which is my nic C1DoG is actually based on biblical name meanings. C1 is Crowned One which is the name meaning for Stephen. And DoG is Dependant on God which is the meaning for Paul my middle name. I just shortened it so it would fit better. Also fits me too, since I actually do bark at drivers that are stupid.

Now I need to get a better sig pic now that the moldings are gone.

Edit: Christmas present for my neon which will be installed after the new year.

C1DoG · Post by **C1DoG** » Tue Dec 28, 2010 9:26 pm

The magnaflow tips I ordered before Christmas arrived the same day I left for Christmas in AZ. Now to find someone to weld them on.

I will get a pic after they are installed with the muffler.

C1DoG · Post by **C1DoG** » Mon Jan 03, 2011 1:14 pm

Looks like I am going to wait until I get an srt rear for it before I get the exhaust done. So for now, that is put on hold. Got a new oil cap for it and I am looking at a few cf parts for the engine bay to clean it up a little.

Danteneon · Post by **Danteneon** » Mon Jan 03, 2011 1:17 pm

A SRT rear what? Bumper? If so, don't wait for that. Just use the bumper you have now

C1DoG · Post by **C1DoG** » Mon Jan 03, 2011 1:36 pm

ok... Still gotta find a local shop to weld the tips on.

LilSparkPlug · Post by **LilSparkPlug** » Mon Jan 03, 2011 1:41 pm

Yeah I wouldn't wait, I would just install it all...then again I'm rather impatient when it comes to modifications

C1DoG · Post by **C1DoG** » Mon Jan 03, 2011 1:43 pm

I would install it all, but I am not a welder. And I am a very patient person.

LilSparkPlug · Post by **LilSparkPlug** » Mon Jan 03, 2011 2:04 pm

I'm just impatient with getting them installed, I'm like a kid who just got toys for XMAS, I can't wait to play with them.

C1DoG · Post by **C1DoG** » Mon Jan 03, 2011 2:24 pm

I know the feeling.

C1DoG · Post by **C1DoG** » Wed Jan 05, 2011 12:55 pm

Since my brake drums are rusting. I am going to go ahead and get those painted just your standard black or cast iron look. I don't want it to stand out. Since I am going for mild exterior mods.

C1DoG · Post by **C1DoG** » Sun Jan 09, 2011 4:43 pm

Got home earlier today and found that there is a leak coming from my engine. It's dripping from the tranmission pan but it looks like it is oil. I took a look underneath. I jacked it up and slid underneath and can't seam for the life of me, find out where the leak starts.

Caraudioholic24 · Post by **Caraudioholic24** » Sun Jan 09, 2011 7:56 pm

I like the Airbag logo...curious where you got it...

nice work so far cant wait to see more!!!

C1DoG · Post by **C1DoG** » Mon Jan 10, 2011 11:24 am

If you are referring to the Mopar logo, I have no clue where he got it.

And thanks!