New BUX Item

2k1MotorSport · Post by **2k1MotorSport** » Mon Jun 06, 2011 5:03 pm

Just got this in the mail today. Now if only i had the headlights and wire harness and I would be all set. Slowly trying to make a complete car.

Danteneon · Post by **Danteneon** » Mon Jun 06, 2011 5:10 pm

Now that is cool!

teamliviD · Post by **teamliviD** » Mon Jun 06, 2011 5:38 pm

Danteneon wrote:Now that is cool!

a23dranger · Post by **a23dranger** » Mon Jun 06, 2011 6:20 pm

just a thought you can always get auto leveling motors and put them in your stock lights. replace the manual adjusters. did that on our taurus head lights

2k1MotorSport · Post by **2k1MotorSport** » Mon Jun 06, 2011 9:29 pm

i may be able to... Haven't looked much into it.

logikfive · Post by **logikfive** » Mon Jun 06, 2011 10:49 pm

How do those things work anyhow? What do they do?

2k1MotorSport · Post by **2k1MotorSport** » Mon Jun 06, 2011 10:51 pm

The knob will adjust the height of the headlights from inside the car.

logikfive · Post by **logikfive** » Mon Jun 06, 2011 10:52 pm

So you can blind people on demand? lol

2k1MotorSport · Post by **2k1MotorSport** » Mon Jun 06, 2011 10:54 pm

pretty much

Johny · Post by **Johny** » Tue Jun 07, 2011 1:44 am

Wow thats awesome, never knew our cars could do that

Midnight_Rider · Post by **Midnight_Rider** » Tue Jun 07, 2011 1:50 am

Johny wrote:Wow thats awesome, never knew our cars could do that

Well,

ours

can't, only export Neons can. But it sounds like the OP is about to change all of that.

Johny · Post by **Johny** » Tue Jun 07, 2011 2:38 am

Midnight_Rider wrote:
Johny wrote:Wow thats awesome, never knew our cars could do that
Well, ours can't, only export Neons can. But it sounds like the OP is about to change all of that.

haha thats true gramps, thats what I ment to say

Gnuserup · Post by **Gnuserup** » Tue Jun 07, 2011 5:11 pm

wiring shouldn´t be the biggest problem ...

somewhere I may have some wiring left in there

You just need it for the adjust-switch (except your need for the headlights and their harness) ?

2k1MotorSport · Post by **2k1MotorSport** » Tue Jun 07, 2011 10:25 pm

yeah.. that would be great.

titansxt · Post by **titansxt** » Wed Jun 08, 2011 1:27 am

I've had one of those for a while now. I got it to test if the level switch was similar to a tubro toys bezel. Been to busy/lazy to test or post up pictures...

Gnuserup · Post by **Gnuserup** » Thu Jun 09, 2011 5:11 pm

just located the wiring at my depot downstairs

Pictures of that plug will follow for anyones interest and will see further to get this special wires out for 2k1...

2k1MotorSport · Post by **2k1MotorSport** » Thu Jun 09, 2011 6:26 pm

you wouldn't happen to have the headlight motors or the wiring for the headlight motor also? I'm really demanding

Gnuserup · Post by **Gnuserup** » Fri Jun 10, 2011 2:52 pm

I cut the wiring out today.

The backside of the switch:

the plug:

hanging around

the orange wire is soldered with alot of his brothers and sisters around here onto one

the violett is soldered onto a bigger violett which comes from the firewallconnector and goes to anywhere I havent figured out

this is the connector where the brown/yellow goes to. I took it out with its cableshoe

the black goes through the dashboard there - I cut it

this is it

cm - don´t know what the turbo toy plug looks like

***

8W-80-25 says:

pin 1 - L13 20BR/YL - signal adjustion
pin 2 - L43 18VT - fused headlight left
pin 3 - Z1 20BK - ground
pin 4 - E2 22OR - dashlight

***

Unfortunatelly I have no headlights or motors left.
I think it might be a lot easier to install complete headlights including the motors. Additionally the front parking light over here is in a seperated socket within the reflector and not within the front turnlight like you have.

At least one or maybe both leveling wires I may have anywhere here, too.