Please lock this thread.

C1DoG · Post by **C1DoG** » Mon Oct 31, 2011 7:09 am

Bought one last thing before I decided to put all mods on hold until spring. I got new exhaust tips. Got some ovals for the srt bumper I have, so when I do lower it. There will be no scraping when I pull in and out from my driveway. I figured that was the most cost effective and easiest next to redoing the front of my driveway.

C1DoG · Post by **C1DoG** » Tue Nov 08, 2011 9:00 am

Here is the engine bay as it sits for now. Still have some cleaning up to do and also get a better battery wrap.

C1DoG · Post by **C1DoG** » Sat Nov 19, 2011 3:54 pm

Into painting the srt bumper. And now there is a mass amount of overspray. Looks like some of the overspray is black along with the clear coat. So it looks like I may have to sand into the last coat of black and get the overspray out.

LilSparkPlug · Post by **LilSparkPlug** » Sat Nov 19, 2011 4:26 pm

Ooo something seriously attacked that battery blankie. Here's some part numbers for them:

2004: 5033228AB
MSRP: 8.90

2005: 5082105AA
MSRP: $9.25

My 04 blankie looks just like your 03 one in my SXT.

C1DoG · Post by **C1DoG** » Sat Nov 19, 2011 5:15 pm

Cool, thanks Crystal!

LilSparkPlug · Post by **LilSparkPlug** » Sat Nov 19, 2011 5:56 pm

Anytime! Something munched on my SXT's so I wrote down the numbers the other week so I could order a new one.

C1DoG · Post by **C1DoG** » Sat Nov 19, 2011 5:58 pm

C1DoG · Post by **C1DoG** » Sat Jan 07, 2012 4:23 pm

I got the srt bumper on today. Paint is not so great, but right now I am not worried about it. Since the whole car will eventually end up painted anyways.

As you can see from the first pic... I have damage to the drivers side corner of the rear bumper reinforcement.

And here it is as it sits now, bumper looks flat black.

JeffM · Post by **JeffM** » Sat Jan 07, 2012 5:09 pm

Looks good

Almost looks like a primered bumper from the flat look of the paint.

Tried buffing it to bring back some of the shine or is the clear completely fucked?

Oh and tuck those tips up more!

C1DoG · Post by **C1DoG** » Sat Jan 07, 2012 5:49 pm

Clear is so messed up. But not too worried about. As for the tips, I have ovals I am going to have put on instead.

DodgeEvo · Post by **DodgeEvo** » Sat Jan 07, 2012 7:25 pm

Lookin good, keep the pics coming.

C1DoG · Post by **C1DoG** » Sat Jan 07, 2012 10:06 pm

DodgeEvo wrote:Lookin good, keep the pics coming.

That's all I have for now. Since I am a stay at home dad, I don't get that much time for the neon right now. No excuses there, it is what it is.

DodgeEvo · Post by **DodgeEvo** » Sun Jan 08, 2012 8:05 am

Don't feel to bad, I haven't worked to much on the neon also. I mainly got it back to stock and been doing some stuff here or there.

C1DoG · Post by **C1DoG** » Sun Jan 08, 2012 9:39 am

Cool... next plans are to save up for KSport coilovers and maybe drop it a little. I can't drop it too much because of the drainage ditch at the end of my driveway that I can't do anthing about. I usually have to pull in at an angle. So pretty much the coilovers will be used for better suspension and to level the car.

DodgeEvo · Post by **DodgeEvo** » Sun Jan 08, 2012 10:05 am

Cool, I have to do the same thing. I think an 1.5 drop would be good were I live.

Tam · Post by **Tam** » Sun Jan 08, 2012 2:27 pm

I'm jealous! Where'd you buy that bumper and for how much?

Looks good mang.

C1DoG · Post by **C1DoG** » Sun Jan 08, 2012 3:38 pm

Tam wrote:I'm jealous! Where'd you buy that bumper and for how much?

Looks good mang.

I bought it off a member here on 2GN.

C1DoG · Post by **C1DoG** » Mon Jan 16, 2012 7:40 pm

Looks like I will end up getting the srt-4 side skirts from Kaminari.

Now to save for them.

LilSparkPlug wrote:Ooo something seriously attacked that battery blankie. Here's some part numbers for them:

2004: 5033228AB
MSRP: 8.90

2005: 5082105AA
MSRP: $9.25

My 04 blankie looks just like your 03 one in my SXT.

Would it be possible to buy one from you? Or do you have a website where I can order one?

FAC3L3SS · Post by **FAC3L3SS** » Sat Feb 04, 2012 9:41 pm

Do you have any more pictures of the aluminum gauge bezel thing?

C1DoG · Post by **C1DoG** » Sat Feb 04, 2012 11:09 pm

That is the only pic I have. I could try and find the website if you want?

FAC3L3SS · Post by **FAC3L3SS** » Sun Feb 05, 2012 12:29 pm

I found the website. I'm just curious how much of the aluminum is covered once you put the "glass" back on.

C1DoG · Post by **C1DoG** » Sun Feb 05, 2012 2:49 pm

I just took this pic. Best I could get.

FAC3L3SS · Post by **FAC3L3SS** » Sun Feb 05, 2012 2:58 pm

Thank you sir! Suspicions confirmed, the parts surrounding the gauges are covered

C1DoG · Post by **C1DoG** » Thu Feb 09, 2012 7:11 pm

Installed the srt rear wing I bought from a friend from South Florida.

blueneo03 · Post by **blueneo03** » Thu Feb 09, 2012 7:46 pm

Let me find a link to mine I used to have it but I altered my gauges so it didn't cover it as much

Edit: found some

C1DoG · Post by **C1DoG** » Fri Feb 10, 2012 6:16 pm

Rear wing with Mopar vinyl sticker.

C1DoG · Post by **C1DoG** » Sat Feb 11, 2012 2:51 pm

I was out on a grocery run so I decided to get a quick pic with my cell. This is after I installed the srt wing. And yes, I know she still needs to be dropped a little. Either that or a little bit more meat on the tires.

DodgeEvo · Post by **DodgeEvo** » Sat Feb 11, 2012 3:42 pm

Looks good

C1DoG · Post by **C1DoG** » Sat Feb 11, 2012 4:13 pm

Thanks man. Now to work at getting coilovers for it.

DodgeEvo · Post by **DodgeEvo** » Sat Feb 11, 2012 4:25 pm

Dont feel bad, I still need to get springs/coilovers also