Questions how to improve your 1/8, 1/4, or 60' times or maybe you just want to share your times, post it here.
5 posts • Page 1 of 1
Their is a local track about 30 min away I have been wanting to go but until I meet the requirements I won't be able to make it lol. Well anyways wanted to see what type of numbers to expect to see at the track ,my car Is an 03 se that has been boosted I am using a td40 which is like small medium size turbo IMO has a quick spool time am boosting 10psi on stock motor other than that I have a short ram intake catless srt exhaust that's pretty much it oh yeah am running the hahn port fueler system . So what should I expect to see guys? Thanks for any input
2 of the requirements I don't meet however they are easy fix one is to have all lug nuts which I have broken studs need to repose them no big deal lol and the other one is must have an overflow tank for coolant I don because the turbo took it's spot lol again should be easy fix am just too lazy. So for the launch any tips advice? Oh and can I use my washer fluid botle as my née overflow tank?
- Junior Admin
- Posts: 19004
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
Yes, just be sure the hose goes to the bottom, so you don't suck air.2003se559 wrote: Oh and can I use my washer fluid botle as my née overflow tank?
You really want an overflow, because I would bet you have a decent air pocket when the engine is cold. Air in the system degrades the coolant faster.
And be sure to either unplug the connector so you don't accidentally spray coolant on your windshield. It would prolly smear badly.
The spray nosels are not connected so all I have to do Is drain the washer fluid tank rinse it really good drill a hole on the lid and drop in the hose that goes to the radiator? Of course and fill it up with coolant. Do I need some type of respirator on the tank?so whenever the water boils it can leak from there and the tank won't explode?