Carbonfiber car wrap ...

Got a question on outside appearance modifications. Questions about body kits, exterior lighting, just anything thats a visual mod on the "exterior" of the car. Ask those questions here.
Post Reply
2GN Member
Posts: 478
Joined: Thu Sep 22, 2011 10:19 pm
Location: Charlton, Ma

Carbonfiber car wrap ...

Post by mjrpaine » Mon Jul 30, 2012 3:20 pm

Just though some of you might like this ...

Economy car wrap Films

Zig Zag Film

Prepare to be Amazed by our Incredible Prices!

As low as .98 cents a square foot,
and under $300.00 for an entire sedan.


Price List

Standard Retail Price = $1.98 sq. ft.

Full Roll Price = $1.69 sq. ft.

10 Roll Price = $.98 sq. ft.

Our Zig Zag film has a very expensive, authentic 3D look.

It has a deep embossed texture, and is top-coated for exterior use.

Standard Colors Available


Our Economy Films are as good as any name brand film...

if you don't believe us, take our challenge, and request a free sample.

It is comparable to 3M Dinoc. See for yourself!


Do your roof for about $39.00

All of our Economy Films have Air Egress technology,

providing bubble free application.

And our Economy Film is Super Durable and Weather Proof!


Peel and stick vinyl, cheaper than paint! And NO waiting for paint to dry!
Easy to apply. Do a whole car in ONE day!
With our 60" wide rolls, you can cover a large area!


An average sedan will use approximately 300 sq. feet (28 sq. meters).

Most whole car wraps can be done in a day! Compare that to paint.

DIY or ask a vinyl application specialist.


Prepare a smooth surface, clean with alcohol,

and stick it on with a little heat. That's all there is to it!

All films can be topcoated with SofTouch® or SpeedClear.

Please inquire for a quote.

Dealers Welcome

One Full Roll of Regular Zig Zag Film is $845.00 ($1.69 sq. ft.)
10 Full Rolls are $490.00 per Roll ($.98 sq. ft.)
Each Full Roll is 60" X 100' (500 sq. ft.)

With prices this low, you can redo your car every year!

Alsa will be adding many new films so please check with us.

All sales for custom painted films are final,

and CANNOT be returned.

For a free sample of Embossed Zig Zag Film
please send a self addressed envelope to:
Alsa Corp.
1213 E 58 Pl
Los Angeles, CA 90001
Attn: Embossed Zig Zag Film Wrap Sample
Official " I'm Going to Drive My Neon till it Dies " Club # 132

User avatar
2GN Member
Posts: 1079
Joined: Wed Jul 09, 2008 11:07 pm
Location: Omaha,Nebraska

Post by NEON PARABOLA » Mon Jul 30, 2012 3:40 pm

I'd love to do my hood in this.......
Official "I'm driving my neon till' it dies #28

BLK 03' NEON SXT 150,000 MILES

User avatar
2GN Member
Posts: 3588
Joined: Tue Nov 04, 2008 8:02 pm
Location: Vermont

Post by JeffM » Mon Jul 30, 2012 3:53 pm

There were a couple A4's over on Audizine that wrapped their cars in stuff like this. It looked ok, but it took a lot longer than one day, and took some serious patience. One guy eventually had a shop do it because of the bubbles.

That Porsche doesn't look right to me. Seems a little 'off'. If these pictures ARE real, the cars in those pictures were most likely professionally done; not your average backyard wrap job.

2GN Member
Posts: 478
Joined: Thu Sep 22, 2011 10:19 pm
Location: Charlton, Ma

Post by mjrpaine » Mon Jul 30, 2012 6:21 pm

Well obviously the company that makes this did it themselves ... but reading more about it on the site ... it does not seem very difficult to do ... plus there are a few little tricks when applying this stuff ...

get some spray on foam glass cleaner. Spray it down over the area your putting it on ... the lay the cover down and line it up ... the glass cleaner keeps it from bonding until you get it all out. Then start from the center and use a rubber squeegy it all out from the center to the outside. It will pull out all the bubbles as you do it and then you can use the heat to bond it completely. Same technique I use when doing window tint.

I would also say for someone who has never done it before ... try with a few practice things first to get used to it before you try on your car.
Official " I'm Going to Drive My Neon till it Dies " Club # 132

User avatar
2GN Member
Posts: 661
Joined: Sun Jun 28, 2009 3:06 pm
Location: Germany

Post by Gnuserup » Tue Jul 31, 2012 3:44 am

If you remember my LE, the orange vinyl and black roof I did myself for trying it, originally she´s silver.
I was trying to apply the vinyl either dry and other parts with a mixture of cleaner and water. It depends on the parts you actually try to do. So a bumper is a lot more difficult and IMHO should be done dry, whole smooth surfaces like hoods and roof could be done with spraying it better.
By the way the foam keeps the vinyl from bonding finally 100%. They say it´s a parting compound which helps to remove the vinyl easier once if needed.
At best if one likes to try a car wrap - he should do it with one or better two or more helpers as long as he has to explore this kind of work.
The helpers should pull the vinyl as much as needed and one is applying heat from a heat gun to the vinyl.
There are lots of videos on youtube a.s.o.
At least it´s like mjrpaine says and furthermore little bubbles will diffuse after a few days until a few weeks.

My black roof looks terribly worn after less than three years now.
More than 80% of the vinyl-surface has gone dead meanwhile. I believe it comes from the sun/ uv. The frames of the doors I did a year later, but they´re looking particularly the same on top (so near the roof) as well.

If you can, try to find a vinyl where you can make sure it´s stable
for a long time.
My orange looks a lot better ( so the hood does) and it´s on for two years now, too. It´s a different brand than the black one is.

Different vinyls have different features. The black one was a bit harder and so easier to apply sometimes, but it broke down quicker. The orange one was a lot softer but sometimes felt like a huuuuge bubblegum, esp. when applying on a hot summerday.
But it does not depend on the colour, just on the brand and type you use.

At best try to get some samples and try to apply them on difficult surfaces and over rough edges.
a neon - what else ?

2GN Member
Posts: 656
Joined: Wed Dec 23, 2009 10:25 pm

Post by 2003se559 » Wed Aug 01, 2012 7:40 pm

I would love to do wrap my roof with this looks good!

Post Reply

Return to “Exterior”