NGC and a crane 14. Good idea?

Have a question about how to make horsepower going the all motor route, here's where to ask it.
Post Reply
Posts: 12
Joined: Tue Aug 12, 2008 9:33 pm

NGC and a crane 14. Good idea?

Post by DennisC » Fri Aug 02, 2013 7:31 pm

Anyone else tried this setup yet with a r/t with bolt ons or a sxt neon? Just trying to get some real honest feedback with CEL if any of anything that a DD for a 80mph ride everyday would find troublesome. Thanks!

occasional demons
Junior Admin
Posts: 18973
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Fri Aug 02, 2013 7:59 pm

You will need a piggyback fuel controller. Not even the pre NGC PCM's like a 14. MAP is too high at idle, and there is too much valve overlap.

A Comp/Zex 400 is about as large as you can go with the factory PCM alone.
dblsg wrote:ya'll a bunch of post whores

2001 Neon ES MTX with '02 R/T PCM
Help support 2GN!

Posts: 12
Joined: Tue Aug 12, 2008 9:33 pm

Post by DennisC » Sat Aug 03, 2013 9:39 am

Thanks for the info so I'd have to run something like megasquirt or even maybe a SAFC from Apexi?

User avatar
2GN Veteran
Posts: 6445
Joined: Mon Nov 21, 2005 9:55 pm
Location: Pasadena, MD

Post by INVUJerry » Sat Aug 03, 2013 9:52 am

The crane 14 needs more rpm to be very effective. You will want a Megasquirt or wait until syked tuning makes an NGC ecu. I would run a comp400 since its designed for stock RPMs.
So many neons so little time.

Post Reply

Return to “Naturally Aspirated”