Someone school me on my speakers and amp
-
Unknown-Destiny
- n00b
- Posts: 19
- Joined: Mon Jun 26, 2006 7:25 pm
Someone school me on my speakers and amp
Ok, I inherited my fathers speakers and amplifier. I know they did sound good in his '94 Toyota Camry. I want to know what the neon community thinks.
Specs:
Polk Ex-Series II speakers
Driver Complement: 6" x 9" 3 Way
Mounting Depth (top mount): 3 1/8"
Cutout Diameter: 5 15/16" x 8 15/16
Frequency Response: 45Hz - 22kHz
Power Handling: 180 watts max
Nominal Impedance: 4 ohms
Sensitivity (SPL at 1 watt/1 meter): 93dB
Polk Ex-Series II speakers
Driver Complement: 6 1/2 coaxial
Mounting Depth (top mount): 2 1/8"
Cutout Diameter: 5 3/8"
Frequency Response: 75Hz - 22kHz
Power Handling: 120 watts max
Nominal Impedance: 4 ohms
Sensitivity (SPL at 1 watt/1 meter): 92dB
Amplifier
Alpine V Power MRP-F200
DC-DC 4/3/2 Channel Power Amplifier
75Wx4CH MAX
180x2CH MAX
So what am I working with? I want something with power and sounds great. Like I said, they sounded great in the old Camry, but what about my neon? Thanks for taking the time to read this.
Specs:
Polk Ex-Series II speakers
Driver Complement: 6" x 9" 3 Way
Mounting Depth (top mount): 3 1/8"
Cutout Diameter: 5 15/16" x 8 15/16
Frequency Response: 45Hz - 22kHz
Power Handling: 180 watts max
Nominal Impedance: 4 ohms
Sensitivity (SPL at 1 watt/1 meter): 93dB
Polk Ex-Series II speakers
Driver Complement: 6 1/2 coaxial
Mounting Depth (top mount): 2 1/8"
Cutout Diameter: 5 3/8"
Frequency Response: 75Hz - 22kHz
Power Handling: 120 watts max
Nominal Impedance: 4 ohms
Sensitivity (SPL at 1 watt/1 meter): 92dB
Amplifier
Alpine V Power MRP-F200
DC-DC 4/3/2 Channel Power Amplifier
75Wx4CH MAX
180x2CH MAX
So what am I working with? I want something with power and sounds great. Like I said, they sounded great in the old Camry, but what about my neon? Thanks for taking the time to read this.
How will my story end?
- eastwoodsn352
- 2GN Member
- Posts: 1793
- Joined: Sat Jun 03, 2006 3:26 pm
- Location: Seattle, WA
- Contact:
is that 75 watts x 4 into a 2 ohm load or a 4 ohm load...but they should sound ok..polk is good stuff

Official "I'm Going to Drive My Neon till it Dies" Club #100-or until I get a big boy job.
My Feedback: viewtopic.php?t=10552
-
Unknown-Destiny
- n00b
- Posts: 19
- Joined: Mon Jun 26, 2006 7:25 pm
- Nick Drake
- 2GN Member
- Posts: 1179
- Joined: Tue Feb 28, 2006 9:17 pm
- Location: Near Albany NY
-
scneonchic
- 2GN Veteran
- Posts: 8884
- Joined: Tue Mar 22, 2005 12:44 am
- Location: Aiken, SC

