i need to find someone with 19's or 20's with air ride...

Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
Post Reply
MarkGetsIt
2GN Member
Posts: 92
Joined: Sat Apr 29, 2006 7:47 pm
Location: Outside Philly, PA

i need to find someone with 19's or 20's with air ride...

Post by MarkGetsIt » Sun Jul 30, 2006 10:39 pm

i need to find someone with 19's or 20's with air ride...

we installed air ride on my car and ran into a little (or really really huge) problem...

i have the easystreet setup and need any advice/help

thanks!!!

User avatar
eastwoodsn352
2GN Member
Posts: 1793
Joined: Sat Jun 03, 2006 3:26 pm
Location: Seattle, WA
Contact:

Post by eastwoodsn352 » Sun Jul 30, 2006 10:43 pm

to sold your problem this is what you need to do........put smaller rims on it lol jp good luck though.
Image
Official "I'm Going to Drive My Neon till it Dies" Club #100-or until I get a big boy job.
My Feedback: viewtopic.php?t=10552

OB
Former Moderator
Posts: 9686
Joined: Tue Nov 15, 2005 9:38 pm
Location: Bay Area, CA

Post by OB » Mon Jul 31, 2006 3:14 am

there are a few peeps on here with air ride, check back tomorrow im sure one of them might come help ya out. might wanna be more specific about your problem tho :wink:
-Derek

|Donate to 2gn|Feedback || OB's | GozziFab | All Business |


norwoodrt
2GN Member
Posts: 196
Joined: Sat May 27, 2006 3:21 am
Location: Philly Suburbs (Norwood)

Post by norwoodrt » Mon Jul 31, 2006 5:14 am

yeah i have air suspension expierience but not on a neon but you could have some general problems but we dunno cause you did not specify your issues. there are a bunch of peeps with 19s but i dunno bout 20s and air ride.
Image

User avatar
Nick Drake
2GN Member
Posts: 1179
Joined: Tue Feb 28, 2006 9:17 pm
Location: Near Albany NY

Post by Nick Drake » Mon Jul 31, 2006 10:47 am

Yeah just tell us your problem, odds are someone on here will know how to help.
kc2002acr wrote:because if I was racing you at a 60 roll, I would have been in second for a second till I hit 3rd, then I would have called you on my cell phone and asked you if my taillights were all working. :rofl: ;) :D

MarkGetsIt
2GN Member
Posts: 92
Joined: Sat Apr 29, 2006 7:47 pm
Location: Outside Philly, PA

Post by MarkGetsIt » Mon Jul 31, 2006 12:12 pm

well here's the story...

i had 235/35/19's on the car
i was running srt4 struts&springs
only issue was rear inner sidewall was rubbing the control arm, fixed that with a 5mm spacer

new problem. intstalled the air ride, went to put the wheels on the car only to realize that now the front, not the back, has the problem

the tire is hitting the front strut bag (yes the bag itself) and easystreet.com told me when i ordered it that it was garenteed to fit. now i'm thinking, even if i go 215/35/19 it still won't clear it because that takes 20mm off the total size and only 10mm off the inner sidewall. i put a 10mm spacer to test fit the car and it still rubbed. my height shouldn't be a factor because stock srt4 wheels/tires are only a little smaller then my 19's. but i'll bet even money that no matter what i do with the strut bags i have now, its still going to rub...

i'm thinking that the only way its going to fit is put the same kind of struts i have on the rear onto the front now

here is what i'm working with:

front:
Image

Rear:
Image


just help me out here, i'm dying[/img]

norwoodrt
2GN Member
Posts: 196
Joined: Sat May 27, 2006 3:21 am
Location: Philly Suburbs (Norwood)

Post by norwoodrt » Mon Jul 31, 2006 2:39 pm

pm krakstar hes got bags and 19s i think im not 100 percent sure but i think hes running the same kind of air ride set up he might have better details. i dont think he has any rubbing issues or if he did he addressed them. thats all i got for now cause if you tried spacers and different size tires the i dunno whats left unless you decide to try and go real custom and position your struts in more like you would have to weld your strut hole closed and weld a new plate on to locate it in more but i dont think it will be worth the effort for it to possibly not work try krakstar. hes a cool guy will help you out if he can! :?:
Image

User avatar
eastwoodsn352
2GN Member
Posts: 1793
Joined: Sat Jun 03, 2006 3:26 pm
Location: Seattle, WA
Contact:

Post by eastwoodsn352 » Mon Jul 31, 2006 3:04 pm

different spacers with a widebody kit sounds like a good fix to me:-p
Image
Official "I'm Going to Drive My Neon till it Dies" Club #100-or until I get a big boy job.
My Feedback: viewtopic.php?t=10552

KrackstaR
Former Moderator
Posts: 3141
Joined: Sun Jan 15, 2006 6:58 pm
Location: deez nuts,MD
Contact:

Post by KrackstaR » Tue Aug 01, 2006 9:40 pm

norwoodrt wrote:pm krakstar hes got bags and 19s

::::::Cough:::::: 20" :::::::Cough::::: 8)

MarkGetsIt wrote:just help me out here, i'm dying
Check your pm. :wink:
Bella Lugrossi wrote: there's a thin line between being a hero and being a memory. ;)
Image
Image

Post Reply

Return to “Suspension, Steering & Brakes”