New thread for new turbo kit comming....
Bores are the same, piston pins are different....
You could always throw in a set of KeithBlack pistons though...
I ran a set of them in my old daytona, cost me $150ish for a set of there Hyper's and they even talked me through gapping the rings properly for forced induction. My daytona ran 25psi of boost with 35psi peak using there pistons and stock forged crank and rods..
I want to see a link for those pistons...
- 2003 Dodge Neon R/T -
-
lolelectricbluesxt
- 2GN Member
- Posts: 1184
- Joined: Thu Feb 23, 2006 11:40 pm
- Location: Irvine, CA.
-
Dutch_Neon
- 2GN Member
- Posts: 168
- Joined: Sat Sep 16, 2006 7:17 pm
- Contact:
As I said in the other topic, I am rather interested in this turbo kit. More important for me however would be the shipping quote for Europe (Netherlands to be exact). How much time would the average shop have to spend mounting this kit and getting it to work properly.
Both shipping and labour is fairly imported since these two things can quite highten the total cost.
Thanks in advance.
Btw, I'm sure if this works and prices stay fair I know of a couple of other 2nd Gen Neons in the Benelux that would want this.
Both shipping and labour is fairly imported since these two things can quite highten the total cost.
Thanks in advance.
Btw, I'm sure if this works and prices stay fair I know of a couple of other 2nd Gen Neons in the Benelux that would want this.
-
seisephiroth
- 2GN Member
- Posts: 958
- Joined: Wed Jan 11, 2006 11:32 am
- Location: Lynchburg, VA
-
seisephiroth
- 2GN Member
- Posts: 958
- Joined: Wed Jan 11, 2006 11:32 am
- Location: Lynchburg, VA
-
Young Gunna
- 2GN Member
- Posts: 87
- Joined: Sat May 21, 2005 11:23 pm
-
Dutch_Neon
- 2GN Member
- Posts: 168
- Joined: Sat Sep 16, 2006 7:17 pm
- Contact:
-
PTPerformance
- n00b
- Posts: 3
- Joined: Wed Aug 09, 2006 7:50 am
Ok guys sorry about the time away. We are still looking at this and need some time to get our shop car up and running before jumping 2 feet into this. I am also having some issues with our SS turbo for the srt-4 getting done and to me so the delays are really cutting into my time. I have another 21 turbos sitting here in stock that are getting torn down to make sure that they are good so I will have the parts here to make it work just need the time now. I will get to the questions latter tonight, thanks for all your support.
-
lambostealth
- 2GN Member
- Posts: 2100
- Joined: Mon Aug 08, 2005 7:09 am
- Location: cen*cal
-
seisephiroth
- 2GN Member
- Posts: 958
- Joined: Wed Jan 11, 2006 11:32 am
- Location: Lynchburg, VA
Pics of this reliable kit? If there is in fact a kit.

AEM CAI w/bypass valve, Screamin Deamon coil, Crane Firewire 8.5mm wires, Prothane race inserts, DC rear strut bar, 16in Konig incidents, and universal muffler.
tamadrumr88 wrote: "because you touch yourself at night. now dont ask any more stupid questions."
-
sxt42uner06
- 2GN Member
- Posts: 402
- Joined: Tue Sep 12, 2006 1:47 pm
- Location: Pittsburgh, Pa
some one
Davik... Some one please pimp slap this kid r u really that dumb??? Have you looked lately on srtforums.com if so im sure youve heard of ptp ...
But in any case im excited to see this and if you could set up some kinda payment plan that would be shibby and id be all over that
But in any case im excited to see this and if you could set up some kinda payment plan that would be shibby and id be all over that

Any new info on this??
2005 SX 2.0 - http://www.cardomain.com/ride/2092484
Rear sway bar brackets on sale! - viewtopic.php?t=19840
My Feedback - viewtopic.php?t=10546

Rear sway bar brackets on sale! - viewtopic.php?t=19840
My Feedback - viewtopic.php?t=10546

-
Mr Josh Zombie
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH



