how hard is it to take off r/t sideskirts?

Louie · Post by **Louie** » Tue Jun 15, 2004 12:28 pm

i know they have screws on the ends, and clips in the middle.. but i dont want to break any clips.

anyone know how they come off exactly?

Post by **Diablo0** » Tue Jun 15, 2004 12:52 pm

I think they are partly held on with double sided tape

and why are you taking them off?

DannyBoy · Post by **DannyBoy** » Tue Jun 15, 2004 1:21 pm

Diablo0 wrote:and why are you taking them off?

So he can ship them to me!

Post by **Diablo0** » Tue Jun 15, 2004 1:30 pm

your not serious are you?

Louie · Post by **Louie** » Tue Jun 15, 2004 1:57 pm

i want to see how hard it would be to do this. just to make it look more evened out

look where the little mudguard usually is.

grindpunk16 · Post by **grindpunk16** » Tue Jun 15, 2004 4:13 pm

louie just keep your side skirts. hell if you got your coilovers, cf trunk and hood your car would be probally the best looking car. im me later when u have the chance

Stonebender · Post by **Stonebender** » Tue Jun 15, 2004 4:47 pm

Louie wrote:i want to see how hard it would be to do this. just to make it look more evened out
look where the little mudguard usually is.

So the R/T sideskirt goes over it. The Neon looks silly without sideskirts IMO.

Louie · Post by **Louie** » Wed Jun 16, 2004 3:29 am

i dont think u guys get it. i am keeping them

i just want to get rid of the mudguard things

Stonebender · Post by **Stonebender** » Wed Jun 16, 2004 12:45 pm

Louie wrote:i dont think u guys get it. i am keeping them

i just want to get rid of the mudguard things

I see what you're saying now. Sorry.

silver2k2rt · Post by **silver2k2rt** » Thu Jun 17, 2004 12:11 am

hahaha

02ACRCop · Post by **02ACRCop** » Thu Jul 08, 2004 8:14 am

I got an even better question.... How do I put R/T sideskirts ON?? I bought a sweet set and it looks like I have to drill holes i the car. Is that what it takes? Let me know... If anyone has the time... I'd appreciate a step by step thru Email. white440@adelphia.net

Thanks guys!

Louie · Post by **Louie** » Thu Jul 08, 2004 9:47 am

3m double sided adhesive.

Nightspy · Post by **Nightspy** » Thu Jul 08, 2004 9:49 am

^ Amen brotha. 3m

DannyBoy · Post by **DannyBoy** » Thu Jul 08, 2004 1:38 pm

I want some R/T side skirts, but I am afraid they are going to be too low to the ground, My car is already slammed, I already scrape as it is, I dont want to fuck up good R/T sideskirts, oh well!

Louie · Post by **Louie** » Thu Jul 08, 2004 1:40 pm

they're not any lower than normal.

the lowest point on your car will still be the jacking points..

the only point on the r/t sides that could possiblly be lower, is the little mudguard looking thing right in front.

but im working on removing that

02ACRCop · Post by **02ACRCop** » Thu Jul 08, 2004 3:14 pm

There's "posts" sticking out that look like they get pushed thru holes to hold them on. Do I take them off and use the 3m tape or no? Thanks again guys...

Mopar00Neon · Post by **Mopar00Neon** » Thu Jul 08, 2004 3:43 pm

02ACRCop wrote:There's "posts" sticking out that look like they get pushed thru holes to hold them on. Do I take them off and use the 3m tape or no? Thanks again guys...

Thats exactally how you do it.

02ACRCop · Post by **02ACRCop** » Thu Jul 08, 2004 9:49 pm

I did a test fit today and see that you're right. With the posts sticking out it looked really difficult/involved. Thanks for the help!

dawm · Post by **dawm** » Tue Dec 28, 2004 10:18 pm

theres like 6 posts that snap into body holes underneath, there are also body pins (those stupid plasic screws that everyoen hates to pull off) at the front middle and rear. i removed mine to get my fender off one day and i was afraid i was gonna break em, but i used a paint mixing stick (wood) and pryed them down and pulled, snapped off. but if you break those pins they look to be removeable/replaceable so no worries. mine had no 3m tape, just those clips and push screws

2000neonES · Post by **2000neonES** » Tue Apr 12, 2005 5:17 pm

does anyone know wher to get them skirts?

Post by **Diablo0** » Tue Apr 12, 2005 6:47 pm

You can get them from your dealer or any other place like www.dodgeparts.com. The part numbers are...

Black - 82208084 - $349.00 Dealer List
Red - 82208209 - $349.00 Dealer List
Silver - 82208085 - $349.00 Dealer List
Primerd - 82208086 - $325.00 Dealer List