throttle body

neon angel · Post by **neon angel** » Thu Oct 12, 2006 8:59 am

what is a stock throttle body sicze for an 05 sxt?

03neonRT · Post by **03neonRT** » Thu Oct 12, 2006 11:07 am

Post by **racer12306** » Thu Oct 12, 2006 5:46 pm

i thought it was 52mm?

turbodudey · Post by **turbodudey** » Thu Oct 12, 2006 5:55 pm

I think it depends on whether it's an atx or mtx. The atx has a larger TB, like the 52mm. The mtx would have a 48 or 49mm.

Frizbe · Post by **Frizbe** » Thu Oct 12, 2006 6:02 pm

turbodudey wrote:I think it depends on whether it's an atx or mtx. The atx has a larger TB, like the 52mm. The mtx would have a 48 or 49mm.

I think that only applies to the 1st gens. While all 2nd gens got the 52mm.

Post by **racer12306** » Thu Oct 12, 2006 6:14 pm

Frizbe wrote:
turbodudey wrote:I think it depends on whether it's an atx or mtx. The atx has a larger TB, like the 52mm. The mtx would have a 48 or 49mm.
I think that only applies to the 1st gens. While all 2nd gens got the 52mm.

thats what i was thinking

turbodudey · Post by **turbodudey** » Thu Oct 12, 2006 6:22 pm

[quote="FrizbI think that only applies to the 1st gens. While all 2nd gens got the 52mm.[/quote]

I know it was still the case for the '00 neons. The atx had the 52mm and the mtx had the 48mm. I can't say for sure if it changed after the '00 models.

Mopar00Neon · Post by **Mopar00Neon** » Thu Oct 12, 2006 7:08 pm

turbodudey wrote:[quote="FrizbI think that only applies to the 1st gens. While all 2nd gens got the 52mm.

I know it was still the case for the '00 neons. The atx had the 52mm and the mtx had the 48mm. I can't say for sure if it changed after the '00 models.[/quote]

Actually, it wasnt. My '00 MTx and my '00 ATx both had 52mm TBs. Only difference was the stiffness of the spring.

turbodudey · Post by **turbodudey** » Thu Oct 12, 2006 7:17 pm

Mopar00Neon wrote:
turbodudey wrote:
Frizbe wrote:I think that only applies to the 1st gens. While all 2nd gens got the 52mm.
I know it was still the case for the '00 neons. The atx had the 52mm and the mtx had the 48mm. I can't say for sure if it changed after the '00 models.
Actually, it wasnt. My '00 MTx and my '00 ATx both had 52mm TBs. Only difference was the stiffness of the spring.

Ah yes. You are correct. My bad. I was thinking of the first gens. Sorry about that.

03neonRT · Post by **03neonRT** » Thu Oct 12, 2006 9:12 pm

03neonRT wrote:49mm

I'm pretty sure i'm right...but hey i've been wrong before...

Post by **Diablo0** » Thu Oct 12, 2006 9:15 pm

They should narrow down to 49MM though as the TB is designed with Venturi effect in mind.