- Need pics of 2nd gens with SRT front bumpers.. -

LCPLPunk · Post by **LCPLPunk** » Tue Oct 17, 2006 11:50 pm

I'm considering getting a SRT front bumper for my R/T..anyone got pics of a conversion? I know TNK's got one, so post urs up homey!

TNK · Post by **TNK** » Wed Oct 18, 2006 12:08 am

J-Villa · Post by **J-Villa** » Wed Oct 18, 2006 12:21 am

i am really starting to grow to like that bumper with the stock hood and on a non srt....make me kinda wanna get one lol!

r/tmike · Post by **r/tmike** » Wed Oct 18, 2006 12:45 am

LaidNeon · Post by **LaidNeon** » Wed Oct 18, 2006 1:10 am

i've got the SRT-D

TNK · Post by **TNK** » Wed Oct 18, 2006 1:18 am

neon_ert3 · Post by **neon_ert3** » Wed Oct 18, 2006 1:48 am

TNK wrote:

JeremyJ · Post by **JeremyJ** » Wed Oct 18, 2006 2:33 am

Here are some pics of my old Neon with the SRT front. It's not a stock SRT front, but you get the picture.

TNK · Post by **TNK** » Wed Oct 18, 2006 2:47 am

^HAWT.

01NeOnEs · Post by **01NeOnEs** » Wed Oct 18, 2006 7:59 am

LCPLPunk · Post by **LCPLPunk** » Wed Oct 18, 2006 8:47 am

Now, my next issue is, how would i get the SRT foglights to work with my R/T setup? And Jeremy, where did u get that bumper?

01NeOnEs · Post by **01NeOnEs** » Wed Oct 18, 2006 9:46 am

LCPLPunk
Now, my next issue is, how would i get the SRT foglights to work with my R/T setup?

theres no difference. unless you modded your factory fogs

2003silverneonsxt · Post by **2003silverneonsxt** » Wed Oct 18, 2006 9:56 am

Jeremy's bumper is a stock SRT front with the crosshairs cut out and fog light areas cut out and the area filled with a big piece of mesh.. thats to my knowledge..he may answer with something else

LCPLPunk · Post by **LCPLPunk** » Wed Oct 18, 2006 10:31 am

oh, awesome, so i guess the fog light swap would just be for me to unplug the R/T fogs and then plug them into the SRT fogs? Or is it not quite that easy?

JeremyJ · Post by **JeremyJ** » Wed Oct 18, 2006 1:04 pm

LCPLPunk wrote: Jeremy, where did u get that bumper?

It was a stock SRT bumper, but like mentioned, I cut the cross hairs and fog light holders out. The covers over the fog holes are actually carbon fiber panels that I made myself. Then I had a body shop smooth it all out and give it the two-tone paint job. From a distance, the black part at the top of the bumper looked like it was cut out. I liked how it turned out.

r/tmike · Post by **r/tmike** » Wed Oct 18, 2006 1:19 pm

LCPLPunk wrote:oh, awesome, so i guess the fog light swap would just be for me to unplug the R/T fogs and then plug them into the SRT fogs? Or is it not quite that easy?

I see you have an 01 R/T. I have an 03 R/T. I had to extend my wires about 10" on one side to get the fogs to work. But my stock fogs are the same as the SRT fogs. As far as how to extend the wires just cut the wire add a longer piece with a connector and you are done.

DannyBoy · Post by **DannyBoy** » Wed Oct 18, 2006 1:20 pm

Those SRT bumpers look bad IMO.

The 02 R/T bumper looks WAY better IMO.

blazesxt · Post by **blazesxt** » Wed Oct 18, 2006 1:22 pm

LCPLPunk · Post by **LCPLPunk** » Wed Oct 18, 2006 1:30 pm

any R/Ts with the bumper? I think it'd still look good with the R/T sideskirts..

r/tmike · Post by **r/tmike** » Wed Oct 18, 2006 1:51 pm

Mine is an R/T look at my post above you can see my side skirts in the pic.

DannyBoy wrote:Those SRT bumpers look bad IMO.

The 02 R/T bumper looks WAY better IMO.

I agree, But the 03+ stock bumpers look like a mini van.