i searched and searched and couldnt find all the answers.

boostinss · Post by **boostinss** » Wed Nov 01, 2006 4:22 pm

i searched and searched and couldn find a complete way to swap out stock speakers.

i need a step by step how to get the door panels off to install the 6'5's.

i also need a step by step way to get board where the 6X9's lay under. i would rather not take out my back seat.

Needd help quick...going to bestbuy in 5min to pick up speakers..and hopefully i will have a good response when i get back

thanks much

Nick Drake · Post by **Nick Drake** » Wed Nov 01, 2006 7:10 pm

For the rear, just pry that carpeting up from one of the corners, it's not held in by anything except the black seatbelt anchors and the childseat anchors, and they both just pop out.

For the front, iirc you just take out the screws holding the door panel in and lift it off (if you have crank windows, you have to take the pin out of the crank to get it off).

It's real easy. You'll figure it out.

Loud-e-nuf · Post by **Loud-e-nuf** » Wed Nov 01, 2006 7:36 pm

I had to rempve the back seat to get my rear speakers out, there was a pop clip in the center right behind the seatback.
________
Chevrolet greenbrier specifications

boostinss · Post by **boostinss** » Wed Nov 01, 2006 8:49 pm

to remove my back seat do i have to un screw the 4 big bolts holding it down to the floor?

2003silverneonsxt · Post by **2003silverneonsxt** » Wed Nov 01, 2006 10:29 pm

STEP BY STEP here ya go!!!

Back 6 x 9's

1. remove back seat cushion by pulling it out..
2. remove 4 t55 torx head bolts
3. pull up and out the back seat portion
4. pull the 3 seat belt things up and out of the rear carpet deck
5. pull c-pillars off
6. pull whole carpet piece forward (can pull outside seatbelts out through slot, but middle seatbelt stays)

front 6.5's
1. remove 3 screws in door panel (one in door opener area, one in cubie hole, one in plan view)
2. pull snap pop's all around door out
3. remove bars for opening/closing door
4. (if electric windows) pull out connectors for them
5. remove 4 screws for stock speakers and remove
6. install new speakers and put everything back together...

if u need nething explained better or pics..i can try to help with that!

boostinss · Post by **boostinss** » Wed Nov 01, 2006 11:11 pm

okay well i have the door speakers changed out...and now for the back 6X9's.

i tried to just pry up the carpet but that didnt go so well....so i will have to take off the back seet..

how can i get those 4 bolts out?
what tool do i need

2003silverneonsxt · Post by **2003silverneonsxt** » Thu Nov 02, 2006 12:36 am

T55 torx head

boostinss · Post by **boostinss** » Thu Nov 02, 2006 8:33 am

is that some kid of head i can put on to a socket wrench???

2003silverneonsxt · Post by **2003silverneonsxt** » Thu Nov 02, 2006 11:05 am

yup u can... u can get one that fits on ur socket wrench just like ne other socket..

boostinss · Post by **boostinss** » Mon Nov 06, 2006 6:55 pm

okay finally finished install

thanks everyone for the help

atom · Post by **atom** » Tue Nov 07, 2006 5:04 pm

Cool, what speakers did you go with? Bet it feels good to get those nasty 6x9's out of there!

boostinss · Post by **boostinss** » Tue Nov 07, 2006 5:13 pm

i just went to best buy...talked to the guy for awile....and he said my best choice would be Pioneer's... so thats what i got

Nick Drake · Post by **Nick Drake** » Tue Nov 07, 2006 9:09 pm

Oooh he lied. Did you get an amp for those speakers?

boostinss · Post by **boostinss** » Wed Nov 08, 2006 12:03 am

no i didnt