what does this mean

OZ10 · Post by **OZ10** » Thu Feb 03, 2005 7:08 pm

P01193 Inlet Air Temp. Voltage High Inlet Air Temp. sensor input above acceptable voltage. this the code i just pulled

Frizbe · Post by **Frizbe** » Fri Feb 04, 2005 12:14 am

AHHH!! RUN AWAY! YOUR CAR IS GOING TO BLOW UP! RUNNNNN!!! NOW!!!! BEFORE IT BLOWS!!!

RopeRat1 · Post by **RopeRat1** » Fri Feb 04, 2005 11:08 am

OZ
Did ya turn the ignition key ON while ya were replacing the intake air tube or forget to plug in the IAT (Intake Air Temp) sensor when ya started the engine?

That code indicates an open circuit (sensor disconnected or broken wire). It's easy to forget to plug in sensors when replacing parts like the air intake tube.

Lemme know what ya find.
Jonathan (RopeRat1)

OZ10 · Post by **OZ10** » Fri Feb 04, 2005 4:47 pm

yes I did for get plug in the sensor in the intake tube

RopeRat1 · Post by **RopeRat1** » Fri Feb 04, 2005 5:01 pm

OZ
Clear the codes (disconnect the battery) and drive the car 10-20miles. Make sure the light stays out.

Glad it was something simple.
Jonathat (RopeRat1)