magnum head yes or no

arodier007 · Post by **arodier007** » Sun Dec 17, 2006 11:34 pm

I would like to know if i am able to put a magnum head on my 05 clone and what other mods should I add to this such as the crane#?? and pistons/springs I will also be changing the exhaust out and want the most power without going turbo.

neonpla · Post by **neonpla** » Mon Dec 18, 2006 12:13 am

http://forum.2gn.org/viewtopic.php?t=60 ... agnum+head

yes you can and here is a how to

as far as upgrading the internal goes, use this:
http://forum.2gn.org/search.php

and you will find answers.

zandifam · Post by **zandifam** » Mon Dec 18, 2006 9:02 am

Yes if you want the MOST power then you will probably need a magnum head or a heavily ported standard head. Ultimately, I think you'll find that power is limited without going to forced induction. But you could still have a lot of fun with a naturally aspirated engine in a light car.

MoparNeonMan · Post by **MoparNeonMan** » Fri Dec 22, 2006 4:56 pm

zandifam wrote:Yes if you want the MOST power then you will probably need a magnum head or a heavily ported standard head. Ultimately, I think you'll find that power is limited without going to forced induction. But you could still have a lot of fun with a naturally aspirated engine in a light car.

But even a heavily ported standard head is just barely as good as a stock mag head...Id get the mag head and port that.

teamliviD · Post by **teamliviD** » Fri Dec 22, 2006 9:21 pm

i have one if you want it...$200 +shipping!

bad04srt · Post by **bad04srt** » Sat Dec 23, 2006 1:08 am

http://forum.2gn.org/viewtopic.php?t=15543

its not done yet but will be complete within the next few days