hahn racecraft stage II turbo kit

Have a question related to Turbos, Nitrous, Supercharging, ect... ask it here.
Post Reply
Adam_T
2GN Member
Posts: 490
Joined: Thu Jan 04, 2007 6:43 pm
Location: Charlotte, NC
Contact:

hahn racecraft stage II turbo kit

Post by Adam_T » Sun Jan 07, 2007 11:24 pm

its official..i will purchase my Hahn Racecraft Stage II full turbo system in 4 months. 4400$ and ill have a sxt faster than a stock srt 4.

8-10 psi 250-275 horsepower.

then upgrade the engine a bit and upgrade to stage 3 which is over 300 hspw.

:-D im excited.
Adam_T (03 RSX Type S) 241whp/173tq ALL MOTOR.

User avatar
bad04srt
2GN Member
Posts: 2473
Joined: Sun Apr 09, 2006 6:45 pm
Location: chitown

Post by bad04srt » Sun Jan 07, 2007 11:49 pm

i would not recommend 8-10 psi on stock pistons....that would be bad
Image

User avatar
spencersummerfield
2GN Member
Posts: 399
Joined: Mon Sep 11, 2006 12:02 pm
Location: London, Ontario

Post by spencersummerfield » Mon Jan 08, 2007 12:53 am

Ya not really the best idea.... stoke stroke BOOM!
2008 Audi A3 - 6 Speed, 2.0T S Line


Image

TNK
2GN Veteran
Posts: 17343
Joined: Fri Jun 11, 2004 12:41 pm
Location: The Evergreen State

Post by TNK » Mon Jan 08, 2007 1:00 am

8 psi is about max for stock bottom ends....
Image

Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Mon Jan 08, 2007 1:12 am

graphite03 was running 10 pretty well for a while. but i bet he had that tuned pretty good. if you were wishy washy on the tune, i bet it would let go.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
LowNSlow
Moderator
Posts: 5016
Joined: Wed May 12, 2004 12:45 am
Location: Houston TX
Contact:

Post by LowNSlow » Mon Jan 08, 2007 1:14 am

It's all in the tune... get it on a dyno and tuned.. you'll be fine.
-John


Image

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Mon Jan 08, 2007 6:26 am

^^^
Until he breaks the 250ft/lb TQ range and then no matter what kind of tune he has, he will throw rods through the block. If it was as easy as a tune to get the numbers he posted above, everyone would be doing it. But the stock bottom end cant handle it.

J-Villa
2GN Veteran
Posts: 6880
Joined: Thu Apr 28, 2005 12:51 am
Location: Hburg, Pa

Post by J-Villa » Mon Jan 08, 2007 7:50 am

yea graphite was on 10psi with his stock srt turbo set up and hit 215 i think...

your not gonna hit 250-275hp range and be faster than a stock srt..... your gonna go boom and spending way too much for a turbo kit when you can piece one together for about 1500 less at least
Wanna Sell Me Your 2gn??
Official I sold my Neon Member #004

Mr Josh Zombie
2010 Platinum Contributor
Posts: 8357
Joined: Tue Aug 22, 2006 8:43 pm
Location: Toledo, OH

Post by Mr Josh Zombie » Mon Jan 08, 2007 8:33 am

..research turbos... obviously you have no idea what these engines can safly hold.

Before and major aplication is added to the engine, research, reasearch, REASEACH. It's either that, or you're going to have one very expensive lawn knome.
Modify your Car • Modify your Body • Modify your Life

Adam_T
2GN Member
Posts: 490
Joined: Thu Jan 04, 2007 6:43 pm
Location: Charlotte, NC
Contact:

Post by Adam_T » Mon Jan 08, 2007 10:14 am

hmmm. ive been contacting modern performance and hahn racecraft and the turbo kit that hahn would be selling me replaces a lot of the parts neccesary. also, i already know about the new pistons and whatnot, MP told me that the first time i asked them the question.


but you guys are talking about how i can get turbo for 1500 or less?


sigh..im glad i am a part of this site, but damn i need some help on this shit people. help?
Adam_T (03 RSX Type S) 241whp/173tq ALL MOTOR.

User avatar
kc2005ptgt
Former Moderator
Posts: 6587
Joined: Wed Dec 14, 2005 7:39 pm
Location: Kansas City, MO
Contact:

Post by kc2005ptgt » Mon Jan 08, 2007 11:28 am

Go to the forced induction section here - there are stickies of people who did the build... plus, the MAN of the site (Diablo0) swapped an srt4 engine into his RT... which is the way a lot of people have gone with our knee-yawns... for 4400 you can have an srt4 engine and all its components (MAYBE) plus still be an SXT. ;)

the 1500$ route? Ask those who turbo'd their 2.0's... Kevin_GP I think as well as tooslow, and TurboDudey is doing it soon (??). There are others, but I forget. :lol:
SOLD 5/13- 2005 Chrysler PT Cruiser GT Convertible | 2.4L Turbo HO | Bright Silver Metallic
SOLD 7/09- 2002 Dodge Neon ACR | Flame Red
The Offical: Sold My Neon Even Though I Swore I Never Would Club | Member #777

Image

00element10
2GN Member
Posts: 281
Joined: Sun Nov 05, 2006 10:02 am

Post by 00element10 » Mon Jan 08, 2007 11:28 am

it's just not as easy as giving your credit card number. You're actually going to have to go searching for stuff and piece it together yourself.

yeah and i can tell you your bottom end wont hold 10psi, i only had 3000 miles on mine :?

Adam_T
2GN Member
Posts: 490
Joined: Thu Jan 04, 2007 6:43 pm
Location: Charlotte, NC
Contact:

Post by Adam_T » Mon Jan 08, 2007 11:41 am

hmmm... sounds like a big project. ill start doing a lot of research. easiest way to me seems like to replace my pistons and whatnot and go with the hahn turbo system....

but ill debate and research a bit. thanks a lot you guys!
Adam_T (03 RSX Type S) 241whp/173tq ALL MOTOR.

J-Villa
2GN Veteran
Posts: 6880
Joined: Thu Apr 28, 2005 12:51 am
Location: Hburg, Pa

Post by J-Villa » Mon Jan 08, 2007 11:54 am

no i meant 1500 less of what you wanna pay....scene people do the srt turbo route all said and done for around like 2200 some cheaper and some more....just depends on what all you buy and set up...
Wanna Sell Me Your 2gn??
Official I sold my Neon Member #004

Adam_T
2GN Member
Posts: 490
Joined: Thu Jan 04, 2007 6:43 pm
Location: Charlotte, NC
Contact:

Post by Adam_T » Mon Jan 08, 2007 12:05 pm

oh really? i am not really knowledgeable on most of these things...so i guess i am going to have to ask around town to see how i can get a srt turbo blah blah in my car. i can have 2200 dollars in a week. haha.
Adam_T (03 RSX Type S) 241whp/173tq ALL MOTOR.

J-Villa
2GN Veteran
Posts: 6880
Joined: Thu Apr 28, 2005 12:51 am
Location: Hburg, Pa

Post by J-Villa » Mon Jan 08, 2007 12:26 pm

http://forum.2gn.org/viewtopic.php?t=4549

and you can start gathering the parts you need off of srtforums.com and other neon forums
Wanna Sell Me Your 2gn??
Official I sold my Neon Member #004

neonpla
2GN Member
Posts: 2571
Joined: Tue Aug 03, 2004 2:27 am
Location: Killeen, TX

Post by neonpla » Mon Jan 08, 2007 2:49 pm

please do your research.. alot of what you ask has been covered in other threads.
2008 Jeep Wrangler Unlimited
2005 Dodge Neon SRT4

00element10
2GN Member
Posts: 281
Joined: Sun Nov 05, 2006 10:02 am

Post by 00element10 » Tue Jan 09, 2007 8:57 am

hey 2200 bucks in a week sounds good. HEY if you wanna share some of the wealth, my turbo neon needs some loving in the pistons and rods department if you wanna slide some of that change my way :lol:

Adam_T
2GN Member
Posts: 490
Joined: Thu Jan 04, 2007 6:43 pm
Location: Charlotte, NC
Contact:

Post by Adam_T » Tue Jan 09, 2007 10:19 am

hahaha :-({|=
Adam_T (03 RSX Type S) 241whp/173tq ALL MOTOR.

00element10
2GN Member
Posts: 281
Joined: Sun Nov 05, 2006 10:02 am

Post by 00element10 » Tue Jan 09, 2007 10:32 am

exactly

Kevin_GP
2GN Member
Posts: 1263
Joined: Thu May 13, 2004 11:46 am
Location: Miami

Post by Kevin_GP » Tue Jan 09, 2007 11:11 am

8 psi is max with stock computer if you want to keep your internals inside your engine. Fuel tunning is not the problem, its timing and compression. I have a magnum so my timing is alittle more advanced, or so I hear. I know turbos differ from each other, I have an srt-4 but I would never go over 8 psi with stock timing or without a headshim. It doesnt have much to do with the internals if you are running stock computer, it pulls timing at weird times and is not predictable. If you want to be safe I wouldnt really go over 6 psi unless you know what you are doing with a rrfpr and have some tricks up your sleve.

Also you cant compair horsepower with our cars to srt-4s. I know I am not close to 250 tq (probally 200 or less) but I am faster than lightly modded srt-4s (intake, intercooler, no map clamp). Agian my car is alittle different because of the mag head and barely any options. HP from one engine is not the same to another.

Graphite went to 10 psi but he had a headshim im pretty sure.

User avatar
srt-design
2GN Member
Posts: 228
Joined: Tue May 23, 2006 7:27 pm
Location: MTL

reply

Post by srt-design » Tue Jan 09, 2007 1:33 pm

I might be selling my "Hahn Racecraft stage 2" turbo kit.

Some drunk fucker backed up into my car and smashed it was parked in front of my friends house and i just starting to think about being conservative because the look of the car gave me a rude awaking! anyways...

i have a brand new hahn stage 2 manifold, stage 2 turbo (new), srt-4 stage 1 injectors (used), walbro fuel pump (new), SPW boost guage, oil temp guage... and some other shit for the turbo... i might be selling it for what i paid, something in the $1,200 - 1,500 range.... not looking to make any money, i posted the link somewhere in the turbo section when i bought it off ebay not that long ago...

if this interests you lemme know.
MTX 05
Mods: K&N intake w/heatshield, functional r/t intake w/ Lorenzo 60mm t/b, Borla Header, MPx UDP, LUK PRO GOLD Aluminum Flywheel w/ clutch, r/t dual exhaust, Firm M/M, C/D Slotted Rotors, Mopar STS, SD Coil, No A/C, Eibach Sportlines, f/r struts, Ractive Racing Seats, 20% tint all around, black tail L.E.D.'s, etc...

User avatar
weber
2GN Member
Posts: 349
Joined: Sun Feb 27, 2005 10:55 pm
Location: Austin MN

Post by weber » Wed Jan 10, 2007 11:30 am

I ran 10psi safely :) with race fuel and a step colder set of plugs ;)

I wouldn't push over 8 on stock internals. Also, get yourself a clutch while your at it. Mine started slipping at 6 psi (srt turbo), so i tuned her and let her loose on 10. Car is sitting in the garage now , lol.
02 FlameRed SXT. (SOLD)
2010 Subaru WRX STI

esteinmaier
Supporting Vendor
Posts: 3324
Joined: Fri Dec 09, 2005 3:40 pm

Post by esteinmaier » Fri Jan 12, 2007 5:21 pm

00element10 wrote:it's just not as easy as giving your credit card number. You're actually going to have to go searching for stuff and piece it together yourself.

yeah and i can tell you your bottom end wont hold 10psi, i only had 3000 miles on mine :?
Once again, it's all in the tune. Mine's seen 11.5 psi, and hits hard as hell, and also is faster than an SRT. Note that he's buying the PortFooler. That implies that he's NGC. 9.3:1 compression ratio, not 9.8:1.

Go ahead and run 10psi. Don't use a manual boost controller, as spiking to 12 is a bad idea unless you really know what you're doing to tune it.
ASP - First NGC SOHC in the 13s and the 12s. First SOHC neon over 500whp. First NGC Neon on MS.
Winston Churchill wrote:Yes, Madam, I am drunk, but in the morning I shall be sober and you will still be ugly.

quicksilvr
Former Moderator
Posts: 3239
Joined: Fri Jul 30, 2004 7:19 pm
Location: St. Joseph, MO
Contact:

Post by quicksilvr » Fri Jan 12, 2007 6:15 pm

weber wrote:I ran 10psi safely :) with race fuel and a step colder set of plugs ;)

I wouldn't push over 8 on stock internals. Also, get yourself a clutch while your at it. Mine started slipping at 6 psi (srt turbo), so i tuned her and let her loose on 10. Car is sitting in the garage now , lol.

Dude, where ya been? Nice to see you around here again. 8)
-Dave
Image
2001 Dodge Neon R/T

Post Reply

Return to “Forced Induction”