20" rims on my se any help offset tire size etc!

kplaya186 · Post by **kplaya186** » Sun Feb 11, 2007 12:45 pm

racer12306 wrote:31lbs each

i figure thats not too bad for their size, but thats twice what a stock wheel weighs. you car is gonna be slow as hell.

Not to mention the fact of how hard it is going to be to stop.

sullygully · Post by **sullygully** » Sun Feb 11, 2007 3:28 pm

Hey driveby, let me know how those fit will ya. Because i've been looking at some 20" x 7.5" Motegi DP10's, and i'm curious how they will fit. However yours are 42mm offset, and the dp10s are 45mm. I think worst case scenario i'd have to roll the fenders is all.

And don't let the speed freaks get to you bud, some of us, like you and me, just want to look good, and aren't too concerned about who gets to the next stop light first.

drivebuy · Post by **drivebuy** » Mon Feb 12, 2007 5:58 am

yeah ill posts some snaps of me fittin them any the problems fitting them on there

gski4life · Post by **gski4life** » Tue Feb 13, 2007 12:12 am

yes I wanna see these......I'm THINKING of 20 inches too.........anybody wanna buy my 18's???

NeonOn19s · Post by **NeonOn19s** » Tue Feb 13, 2007 2:19 pm

I have fitted 19 x 7.5 on mine and will be installing my new 19 x8 from TSW shortly... no serious modifying was needed... replaced the suspension with a full coil over system and grinded part of the frame...

Mr Josh Zombie · Post by **Mr Josh Zombie** » Tue Feb 13, 2007 3:14 pm

sullygully wrote:Hey driveby, let me know how those fit will ya. Because i've been looking at some 20" x 7.5" Motegi DP10's, and i'm curious how they will fit. However yours are 42mm offset, and the dp10s are 45mm. I think worst case scenario i'd have to roll the fenders is all.

And don't let the speed freaks get to you bud, some of us, like you and me, just want to look good, and aren't too concerned about who gets to the next stop light first.

I can't wait to see 'em.

01rtgurl · Post by **01rtgurl** » Tue Feb 13, 2007 7:55 pm

subscribed.

drivebuy · Post by **drivebuy** » Wed Feb 14, 2007 3:54 pm

well they should of left by now and with any luck they will be here by friday!

drivebuy · Post by **drivebuy** » Sun Feb 25, 2007 8:45 pm

well they should be here in the morn they arrived in u.k friday sometime

seisephiroth · Post by **seisephiroth** » Mon Feb 26, 2007 1:09 am

KrackstaR wrote:yea i dont think you will be dissappointed.

krack your car is teh sex

/endhijack

i wanna see dem 20"s too

drivebuy · Post by **drivebuy** » Mon Feb 26, 2007 4:43 am

they will be here in an hour!!!

drivers on his way!

dblsg · Post by **dblsg** » Mon Feb 26, 2007 11:46 am

w00t w00t

drivebuy · Post by **drivebuy** » Mon Feb 26, 2007 5:15 pm

FITTED
BIG GRINDER was NEEDED !!
will post how 2 when i get five mins

EmersonHart13 · Post by **EmersonHart13** » Mon Feb 26, 2007 5:42 pm

To be honest, that looks frightening....

http://www.autoblog.com/2007/02/15/gto- ... -shredder/

sullygully · Post by **sullygully** » Mon Feb 26, 2007 6:01 pm

haha, i'm going to call you a donk now. To be honest those rims look better then i though they would. I think you need a kit now to complement them. oh ya, and air bags!.

It looks from your pics that i should be able to fit the dp10s no problem since i'm on bags. hmmm decisions decisions. whats the clearance like from wheel to fender? Would you be able to tuck the rims in without rubbing?

TNK · Post by **TNK** » Mon Feb 26, 2007 6:02 pm

you need a kit. they look good but they lookout of place without a kit.

drivebuy · Post by **drivebuy** » Mon Feb 26, 2007 6:08 pm

starting to think that myself but hay one step at a time

loads clearance on the archs even got a 5mm spacer on the fronts and there is still room got cam bolts aswell and can set them all the way out +ve camber and still no scrubbin!! dropped on eibachs 35mm kit springs

KrackstaR · Post by **KrackstaR** » Mon Feb 26, 2007 7:01 pm

drivebuy wrote:FITTED
BIG GRINDER was NEEDED !!
will post how 2 when i get five mins

wow they look great, truley need a kit or even a lip kit something to flow with them but hey they look good the way they are too. good color choice too.

dblsg · Post by **dblsg** » Mon Feb 26, 2007 7:29 pm

neon_ert3 · Post by **neon_ert3** » Mon Feb 26, 2007 8:26 pm

HAWTNESS!!!!!!!!!!!!!

how much everything cost u? and is that you daily driver? ive been thinkin bout goin w/ 19s or 20s but not sure how theyll be w/ my DD

drivebuy · Post by **drivebuy** » Tue Feb 27, 2007 3:09 am

yaeh its my daily driver and i found that the rides not bad no worse than before realy!

deffo glad i went 20"

think id better get a lip kit! or change my log in name to donk!

but to be homest got to wait for the springs to settle

Mr Josh Zombie · Post by **Mr Josh Zombie** » Tue Feb 27, 2007 8:42 am

i'm sorry, but that looks REALLY bad without anything else done to your neon. Get bagged, get a kit, otherwise i'd go back to your stockers until you do so....

sorry man.
Like the idea, just don't like how you went about it at all.

sullygully · Post by **sullygully** » Tue Feb 27, 2007 3:02 pm

^^ hes still gone the right way about it IMO. Lowering and wheels should always come before a body kit.

neon_ert3 · Post by **neon_ert3** » Tue Feb 27, 2007 3:10 pm

i think it looks good the way it is. well from the side pic atleast.

Mr Josh Zombie · Post by **Mr Josh Zombie** » Tue Feb 27, 2007 3:16 pm

true.... but lowering and "regular" sized wheels will look fine on a mostly un-modified car... like his

it looks really out of place. Defentally can't wait to see the progression though.

TNK · Post by **TNK** » Tue Feb 27, 2007 8:17 pm

01WhiteNe0n · Post by **01WhiteNe0n** » Fri Mar 02, 2007 6:43 pm

looks real nice..

drivebuy · Post by **drivebuy** » Fri Mar 02, 2007 6:53 pm

k so what lip kit should i put on next?

kc2005ptgt · Post by **kc2005ptgt** » Sat Mar 03, 2007 1:12 am

mopar lip kit

hansken_yo · Post by **hansken_yo** » Sat Mar 03, 2007 2:18 am