Amp power source RUNNING THE WIRE

Young Gunna · Post by **Young Gunna** » Sun Jan 14, 2007 3:29 pm

Hey guys im tryin to wire an amp, i have the cable to run from the battery positive terminal to the trunk

What holes are in the firewall that i could run the wire to the interior?

In not what is another solution?

Thank You

Anonymous User · Post by **Anonymous User** » Sun Jan 14, 2007 4:50 pm

theres a rubber gourment thing that is black on the dirvers side firewall. it is about a foot or so above the brake pedal area. you should be able to see it from the engine bay also.

kc2005ptgt · Post by **kc2005ptgt** » Fri Jan 19, 2007 10:40 pm

just please, please, please, do not run it through the fender - I will e-slap you!

Also, if you pull out the driver side kick panel as well as both driver side door plastic trim and the bottom portion of the B pillar as well as the bottom portion of your back seat you will have FULL access to running the wire correctly and with the most protection from elements, and be able to push it down nice and far under your carpet. AQnd please, do not run the RCA's for the amp down the same side, run it down the middle or the opposite side (passenger). Make sure you run your remote wire down the same side as your power wire.

Just a little help