intake backfire? maybe, possibly
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
intake backfire? maybe, possibly
Without getting into the list of add on's I basically got 01 r/t with hahn racecraft stage 2 turbo kit. While mashing the throttle in third or fourth there is sometimes a loud pop under the hood, a temporary loss of power, then bam i'm off and running again. SOunds just like the pop most people have in there exhausts when running rich ( not a good thing but its a start to using my muffler as a flame thrower) . Anyways anyone have or heard of a similar problem. I'm becoming clueless and there's noone to take my car too around here that doesnt just look at it and go "gollllllllleeeeeeeeeeee that thing gots a turbo, thats magic"
pcm's do more in ten minutes then most people do all day
-
gilly02le
- 2GN Member
- Posts: 1423
- Joined: Fri Oct 27, 2006 12:13 am
- Location: Kingston, Ontario, Canada
- Contact:
Re: intake backfire? maybe, possibly
wickedneonrt wrote:and there's noone to take my car too around here that doesnt just look at it and go "gollllllllleeeeeeeeeeee that thing gots a turbo, thats magic"
Bahahahahahahha, thats hilarious
New Sig Time.
-
00element10
- 2GN Member
- Posts: 281
- Joined: Sun Nov 05, 2006 10:02 am
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
- hansken_yo
- 2GN Veteran
- Posts: 5148
- Joined: Wed Oct 11, 2006 10:54 am
- Location: Washington

| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.
-
00element10
- 2GN Member
- Posts: 281
- Joined: Sun Nov 05, 2006 10:02 am
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
i dont know how to put pics on this site. all i can do is email ya unless this works http://www.righteousrides.us/nickcar/
pcm's do more in ten minutes then most people do all day
-
MarkGetsIt
- 2GN Member
- Posts: 92
- Joined: Sat Apr 29, 2006 7:47 pm
- Location: Outside Philly, PA
-
Mr Josh Zombie
- 2010 Platinum Contributor
- Posts: 8357
- Joined: Tue Aug 22, 2006 8:43 pm
- Location: Toledo, OH
-
scneonchic
- 2GN Veteran
- Posts: 8884
- Joined: Tue Mar 22, 2005 12:44 am
- Location: Aiken, SC
-
quicksilvr
- Former Moderator
- Posts: 3239
- Joined: Fri Jul 30, 2004 7:19 pm
- Location: St. Joseph, MO
- Contact:
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
i'm fine . tranny blew up dumped fluid on turbo and exhaust . it cooked til it got to the nitrous and then it immitated the eclipse in fast and furious without the four foot jump. all is good in the end as i have a daytona charger sitting at the dealer sat to pick up. Shit rolls uphill occasionally. thanks for concerns guys.
pcm's do more in ten minutes then most people do all day
-
yellowpatrol
- 2GN Member
- Posts: 2847
- Joined: Mon Jan 01, 2007 8:12 pm
- Location: Kansas City
Wow dude that's crazy! And a local one too!!
FEEDBACK
Adionik wrote:On a 100% stock SRT engine i've seen detonation on 93 octane, I know what i'm talking about.
-
scneonchic
- 2GN Veteran
- Posts: 8884
- Joined: Tue Mar 22, 2005 12:44 am
- Location: Aiken, SC
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
- wickedneonrt
- 2GN Member
- Posts: 142
- Joined: Wed Sep 22, 2004 12:37 am
- Location: lansing ks
Well its been awhile but i thought i'd update
sorry i forgot i left this thread a bit out in the open
What had happened was i finally overpowered my rods. 50 shot of zex and 15 psi of hahn boost (plus every stinking bolt on imaginable at the time , pistons, rings, cam and all, just no rods) I had read around here a million times the stock rods were holding out on peoples cars til about 300 whp and i was in the 275 range (not dynoed, just gteched average) I knew time was coming for the rods but the budget hadnt allowed. Simply put
I threw a rod, which made swiss cheese of my block and dumped hot oil on my turbo. Of course i was out in the boonies between towns so all i could do was pull over and watch. The flames burned for over 23 min before fire trucks showed up, just in time for the flames to reach my freshly filled nitrous bottle and gas tank. IN a big puff of black smoke my baby was gone.
roll cage stayed in tact though
anyways, i did end up with a 06 daytona charger and i 've done a few things to it but i still miss my neon. That was my fourth neon and second built one. Very sad. Of course i had it paid off for nearly three months too.



sorry i forgot i left this thread a bit out in the open
What had happened was i finally overpowered my rods. 50 shot of zex and 15 psi of hahn boost (plus every stinking bolt on imaginable at the time , pistons, rings, cam and all, just no rods) I had read around here a million times the stock rods were holding out on peoples cars til about 300 whp and i was in the 275 range (not dynoed, just gteched average) I knew time was coming for the rods but the budget hadnt allowed. Simply put
I threw a rod, which made swiss cheese of my block and dumped hot oil on my turbo. Of course i was out in the boonies between towns so all i could do was pull over and watch. The flames burned for over 23 min before fire trucks showed up, just in time for the flames to reach my freshly filled nitrous bottle and gas tank. IN a big puff of black smoke my baby was gone.
roll cage stayed in tact though
anyways, i did end up with a 06 daytona charger and i 've done a few things to it but i still miss my neon. That was my fourth neon and second built one. Very sad. Of course i had it paid off for nearly three months too.



pcm's do more in ten minutes then most people do all day












