my white car....

Have a question that your not sure what category it fits into or isn't really a specific question about a specific part? Ask it here...
Post Reply
TNK
2GN Veteran
Posts: 17343
Joined: Fri Jun 11, 2004 12:41 pm
Location: The Evergreen State

my white car....

Post by TNK » Fri Jan 26, 2007 11:50 am

ok. so i have decided that i want to put a little money into my 00 and get it back on the road, make it my beater/commuter/whatever car, so i can keep the miles down on the blue car.

here's what's wrong with it, i need a new upper motor mount mounting bracket and bolt, that's easy enough to fix... definitely need to redrop it and align it... fairly easy...

but the main problem i parked it and let it sit to rot in the first place.... it has a stutter. it's not an ignition system problem, it's getting oil on one of the spark plugs. just on the tip, not on the threads. so it isnt a leaky valve cover seal. anyone got any ideas on what might be causing this? ive heard valve seals... id liek to fix all possible causes, to make sure its fixed. a parts list and price list would be GREAT.

i also figure ill slap the SXT wheels that are on the wife's car on it with the fat rubbers i have on the le baron wheeels... and after i have it running good again, i'll start cleaning her up again, find a white hood and trunk and gas door (bright white) and fix the rear bumper, or replace it. or hell, maybe just get a new trunk and take my scratched stock hood from teh blue car and get the car maaco'd.. i dont know, anywyas, my main concern is the engine.

if anyone has a lead on a cheap motor, with a 5 speed, id like to do a fresh motor, with a 5 speed swap....


thansk and sorry this post rambled on and on...
Image

Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.

yellowpatrol
2GN Member
Posts: 2847
Joined: Mon Jan 01, 2007 8:12 pm
Location: Kansas City

Re: my white car....

Post by yellowpatrol » Fri Jan 26, 2007 11:54 am

TNK wrote:if anyone has a lead on a cheap motor, with a 5 speed, id like to do a fresh motor, with a 5 speed swap..
Yeah no problem. I'll trade you my 2.0 w/ 5spd for an SRT-4 engine.

:twisted:
FEEDBACK
Image
Adionik wrote:On a 100% stock SRT engine i've seen detonation on 93 octane, I know what i'm talking about.

User avatar
hansken_yo
2GN Veteran
Posts: 5148
Joined: Wed Oct 11, 2006 10:54 am
Location: Washington

Post by hansken_yo » Fri Jan 26, 2007 11:59 am

yeah.. mine will be available in late May when Iam finally able to do the swap, and It will be in Wa. :)
Image
| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.

TNK
2GN Veteran
Posts: 17343
Joined: Fri Jun 11, 2004 12:41 pm
Location: The Evergreen State

Post by TNK » Fri Jan 26, 2007 12:09 pm

^are you 5 speed? what do you think you'll want for it if i can limp the little hooch along til then? cuz that would be really nice, have a fairly new motor....
Image

Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.

neonpla
2GN Member
Posts: 2571
Joined: Tue Aug 03, 2004 2:27 am
Location: Killeen, TX

Post by neonpla » Fri Jan 26, 2007 1:07 pm

You need to get that car running, and one color.
2008 Jeep Wrangler Unlimited
2005 Dodge Neon SRT4

white2000neon
2GN Member
Posts: 386
Joined: Sun Mar 05, 2006 1:43 pm
Location: Bensalem, Pa
Contact:

Post by white2000neon » Fri Jan 26, 2007 2:55 pm

The oil on the plug is probally a bad valve stem seal or you have a bad ring on that piston. I would drive it a bit because it was sitting for a bit the oil rings might not be expanded and letting oil get into the cc causing you to foul the plug out in that cylinder causing you studder.
2003 SRT 4
Forward Motion E1 Turbo
Devil Own W/I with Progressive Controller
Kinetic Wastegate
MPx 3" Exhaust
MPx Intercooler
AGP Cold Air Intake
Stage 2 Injectors
Stage 3 ECU
Walbro 255lph Fuel Pump
180* Thermostat
AEM Wideband
Aeroforce Scanguage
DCR Oil Mod
PTP Check Valve
Exhaust Depot Hardpipes
Greddy Type RS BOV
Turbo Timer

User avatar
hansken_yo
2GN Veteran
Posts: 5148
Joined: Wed Oct 11, 2006 10:54 am
Location: Washington

Post by hansken_yo » Fri Jan 26, 2007 8:10 pm

yeah... shes a 5 spd... and as for how much let me think about it (figure shit out) and I'll shoot a pm.

she just hit 40k @ 3.5 years old.
Image
| - John || Project Log || Official I'm Going To Drive My Neon Till It Dies Club #000001 |
Everyone knows that for breasts to be "perfect" they need to be within reach.

User avatar
kc2005ptgt
Former Moderator
Posts: 6587
Joined: Wed Dec 14, 2005 7:39 pm
Location: Kansas City, MO
Contact:

Post by kc2005ptgt » Fri Jan 26, 2007 10:37 pm

one thing to remember, tink, you will need a bunch o stuff to swap an 03 into an 00... like, ecu, wiring harness, engine, etc.
SOLD 5/13- 2005 Chrysler PT Cruiser GT Convertible | 2.4L Turbo HO | Bright Silver Metallic
SOLD 7/09- 2002 Dodge Neon ACR | Flame Red
The Offical: Sold My Neon Even Though I Swore I Never Would Club | Member #777

Image

TNK
2GN Veteran
Posts: 17343
Joined: Fri Jun 11, 2004 12:41 pm
Location: The Evergreen State

Post by TNK » Fri Jan 26, 2007 10:56 pm

cant i use all my wiring and stuff and sensors from the 00 on the 03 motor to avoid the NGC?

the problem isnt a recent one, it was happening when i was daily driving the car, so it isnt from sitting. but i will check inot the valve stem seals, i hope that's it instead of the rings...


how much are a set of valve stem seals? anyone know?
Image

Modify Your Car - Modify Your Body - Modify Your Life
TheRandom1 wrote:My true opinion here is that the only time rubber should be stretched is when it's going over a penis.

Post Reply

Return to “General 2nd Gen Discussion”