spring question

Have some questions about how to achive better handling and stopping power using different springs, upgrading to coilovers, questions on swaybars, bushings, different rotors, pads, ect... Having any steering problems or questions about steering racks, tie rods, tie rod ends, ect... ask these questions here.
Post Reply
User avatar
danielc24
2GN Member
Posts: 601
Joined: Mon Jul 31, 2006 3:59 pm
Location: Sidney , OH

spring question

Post by danielc24 » Mon Feb 05, 2007 8:19 pm

will 1st gen sport springs lower a 2gn?
Image
Top
SlvrACR
2GN Member
Posts: 4220
Joined: Thu Jun 16, 2005 5:13 pm
Location: Roseville MI

Post by SlvrACR » Mon Feb 05, 2007 8:34 pm

Yes but to much for a stock strut. Only 1st gens springs that are good for a 2nd gen is the ACR/RT ones. Unless they have the part numbers on them Im not sure how to tell by looking
2gn Member Feedback
My Project Log
01 Dodge ACR - SOLD
01 Dodge RT - 279whp 329wtq
Image
Top
SinfulNeon
2GN Member
Posts: 254
Joined: Sun Feb 04, 2007 2:21 am
Location: Redding, Ca
Contact:
Contact SinfulNeon

Post by SinfulNeon » Wed Feb 21, 2007 3:52 am

okay as you have mentioned ACR/RT springs are recommended now what else should be pared up with those should we use the shocks as well from that 1st gen and cut the bump stops in half, I get back and forth information on this and I would really like to get this cleared up on one hand I hear your neon handles great with this solution and then I hear you will blow your shocks your ride will be bouncy and so on and I would really like some straight forward answers like if I get the 1st gen ACR/RT springs what is the exact drop and what shocks or whatever should I get with these and what steps to take.

Thanks everyone for your help.
Image
::WTB:: Dual or Tri-pod A-Pillar (black) : Passenger A-Pillar (Black) : AGP Dog Bone Motor Mounts : 1st Gen ACR Springs : Shorty Attn. :
Top
Post Reply

Return to “Suspension, Steering & Brakes”