need help installing afc-neo

srtjesse · Post by **srtjesse** » Sat Feb 24, 2007 10:54 pm

hey guys i just bought a afc-neo but have no clue on how to install it can anyone help with diagrams or something on how or where i need to splice whires or what i have to do or can some one point me in the direction of a diagram or whire lay out thanks any help would be appreciated thanks now my other question i saw a diagram for the safc 2 will this be the same for the afc-neo

DJ CptnCrnch · Post by **DJ CptnCrnch** » Wed Feb 28, 2007 9:10 pm

yeah i would be intested too...i will be installing this in the summer

underway · Post by **underway** » Thu Mar 01, 2007 10:36 am

DJ CptnCrnch wrote:yeah i would be intested too...i will be installing this in the summer

or will you....

DJ CptnCrnch · Post by **DJ CptnCrnch** » Thu Mar 01, 2007 7:17 pm

i will...its to cold to install stuff right now.

srtjesse · Post by **srtjesse** » Sat Mar 03, 2007 2:57 pm

hey guys well i did a little looking aroung and if you look in the stickied secktion you will find this its a safc 2 whiring diagram wich is the same for the afn-neo here is the link
http://forum.2gn.org/viewtopic.php?t=14972

StreetEviL · Post by **StreetEviL** » Sun Mar 11, 2007 12:22 am

I have the A'pexi Neo on my 05' SXT and the sticky with the wiring diagram is slightly different from the NEO wiring. I wouldn't use it to install. U don't have to use like half the wires that come with it. If u guys can wait a little bit before install, I will post directions for install of every wire. I'm at a party right now!

StreetEviL · Post by **StreetEviL** » Sun Mar 11, 2007 1:39 am

These are the wires you will need to install an A'pexi NEO into your neon:

RED wire- Ignition power
RED w/ WHITE tracer wire- Ignition power
GREEN wire- rpm signal
GRAY wire- Throttle signal
BROWN wire- ground
BLACK wire- ground
WHITE wire- MAP signal input to NEO
YELLOW wire- MAP signal output to PCM

These wires arn't needed, just extra information, so you know where all of the extra wires go:

BLUE wire- airflow signal input 2 (Vehicles with RB26DETT)
BROWN w/ WHITE tracer wire- Karman signal output
BLACK w/ WHITE tracer wire- Karman signal input
LIGHT GREEN wire- VTM signal (Vehicles with VTEC)
PURPLE wire- VTEC signal input
PINK wire- VTEC signal output

If you guys have any more questions about the A'pexi NEO, I have install books and instructions sitting by!!! OH yea, if I happened to miss a wire, just tell me and I will post it.

srtjesse · Post by **srtjesse** » Sat Mar 17, 2007 3:46 pm

hey thanks man this really helps allot

refect · Post by **refect** » Sat Mar 17, 2007 5:50 pm

yeh i got an afc neo in mine. it wires up the exact same as the safc2. i just used the safc2 how to install on the srtforums. it works great with no problems. all the extra unused vtec wires and stuff i just tucked away.

StreetEviL · Post by **StreetEviL** » Sun Mar 18, 2007 12:32 am

Glad I could help!!!