Motor mount-HELP PLEASE!

biggrobb1995 · Post by **biggrobb1995** » Mon Mar 05, 2007 10:02 pm

Our 02 needs new motor mounts. How hard is it to replace them. Anybody have info on where I can buy some for a reasonable price? Need all the help I can get guys. Thanks.

lvlistchif · Post by **lvlistchif** » Mon Mar 05, 2007 10:06 pm

i say buy solid ones, then youll never have to worry about motor mounts again, im sure you can buy some on ebay for 100$ or so. gives ur car a bit of an agressive rumble feel but i like it, some people dont, w/e floats ur boat though. ebay like "00 neon motor mounts" or something like that

LCPLPunk · Post by **LCPLPunk** » Mon Mar 05, 2007 10:10 pm

Here is what you do. Find some new/used stock motor mounts, fill them with urethane, let the urethane harden, and then use those.

It is very, very easy to put in new motor mounts, just takes a little time.

biggrobb1995 · Post by **biggrobb1995** » Mon Mar 05, 2007 11:03 pm

Found these on E-bay.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 882&rd=1,1

clackattack44 · Post by **clackattack44** » Mon Mar 05, 2007 11:13 pm

those are only inserts. if you dont have any motor mounts whatsoever, you are going to need the actual housing.

fixitmattman · Post by **fixitmattman** » Mon Mar 05, 2007 11:17 pm

Those are only for the torque struts. The real engine mount is burried between the frame rail and the accessory plate and is a fairly hefty job to get at. The trans mount on the other side isn't as bad to get at, but also a bit of work.

biggrobb1995 · Post by **biggrobb1995** » Tue Mar 06, 2007 10:27 am

I was planning on using the stock mounts and using the inserts.
They should work with the stock mounts right.

underway · Post by **underway** » Tue Mar 06, 2007 12:11 pm

yes theyll work fine assuming your stock mounts arent so destroyed that those wont fit in correctly anymore...personally id go will solids... made my own out of square bar work great...