LED Tail Light Board Group Buy

NiteHawk · Post by **NiteHawk** » Thu Mar 08, 2007 5:03 am

Ok folks. Some of you have been asking for these, and I want to get them for you. They are currently OUT OF STOCK, so I'm offering a groupbuy to get them reordered for everyone

The options you have are:

3mm Narrow Angle

5mm Narrow Angle

5mm Wide Angle

These all give the same effect as far as brightness is concerned, the only differance is what you physically SEE from behind them. The 3mm and 5mm Narrow Angle will appear as bright dots when directly behind the car, but if you're not directly in their line of sight, they are not nearly as bright. the 5mm Wide Angle will have the same intensity no matter WHAT angle you look at them from, since they shoot light 120degrees around, as apposed to the 15 degrees that the narrow angle led's use.

Price for this groupbuy will be $65 SHIPPED inside the USA, $70 Shipped to Canada. Units will be plug and play capable with a 3157 bulb base.

Also. I will be offering a special. Add the LED Reverse Lights for $40 instead of $45(a total savings of $20).

I'de like to see 10 sets be presold, doesnt matter which ones, just 10 sets.

3mm Narrow:
1.
2.
3.
4.
5.

5mm Narrow:
1.
2.
3.
4.
5.

5mm Wide:
1.
2.
3.
4.
5.

After this groupbuy, the reverse lights go back up to $45 and the tail light boards will go up to $75.

glasswars · Post by **glasswars** » Thu Mar 08, 2007 9:14 am

Wasn't there a way to make them the 3rd brake a turn signal too?

NiteHawk · Post by **NiteHawk** » Thu Mar 08, 2007 10:19 am

this isnt that bro.....this is the boards for the actual tail lights

dblsg · Post by **dblsg** » Thu Mar 08, 2007 10:38 am

NiteHawk · Post by **NiteHawk** » Thu Mar 08, 2007 3:36 pm

PICS:

3mm NARROW:

5mm WIDE

more pics:
http://www.srtforums.com/forums/showthread.php?t=332465

satrnbmb · Post by **satrnbmb** » Thu Mar 08, 2007 3:40 pm

Do you guys make clusters that replace the regular bulbs?

NiteHawk · Post by **NiteHawk** » Thu Mar 08, 2007 3:42 pm

for the tail lights? no.

LCPLPunk · Post by **LCPLPunk** » Sat Mar 10, 2007 9:58 am

Will these work in a 2001 model taillight?

How does install work?

Bump for an awesome seller!

NiteHawk · Post by **NiteHawk** » Sat Mar 10, 2007 1:32 pm

I've never done it myself in 01 tails, but seeing as the 01 tails are larger than 03+, i would say its doable no problem...

to install, all you have to do is put your tails in the oven for 10 minutes at 210degrees, this loosens up the tar that dodge uses to seal the tails up. use a flat head screwdriver to pro it open, but dont rush it, take your time... once open you cna affix them inside how you want. I use JBWeld, but others have used expanding foam, etc...

LCPLPunk · Post by **LCPLPunk** » Sat Mar 10, 2007 1:38 pm

what about having preinstalled lights/taillights?

I'd rather buy it assembled than do it myself.

You could charge a core fee like other vendors..

NiteHawk · Post by **NiteHawk** » Sat Mar 10, 2007 1:44 pm

i dont like trying to source tails for a core system. If you can find an extra set of 01 tails, send that, $74 for the boards, and $20 for install, and you've got yourself a deal...

this is a groupbuy though, so i'de still need the other spots committed...