Found some magnum intake manifold info

jmr · Post by **jmr** » Wed Mar 28, 2007 2:35 pm

I called ChryslerPartsDirect.com because like some of you I'm looking for a magnum intake manifold and they are tough to find.
The part # for the assembly is 4884065AE MSRP is $364.00 their price is $283.92 and DCX says it weighs 12 pounds.
The part description is: Engine / transaxle - Engine parts - Intake manifold - W/r/t - 2.0 liter 2001 - 2004

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 2:43 pm

Or, you can go to www.dodgeparts.com go to:
Fuel System / Fuel Induction / Intake / Intake Manifold

Intake manifold, neon, sohc, all, 2.0l, w/high output 03-05 MSRP: $234.00 Your Price: $182.00

"S&H will be 10% of the your total purchase, with a $8.75 minimum shipping charge. "

**EDIT**

Wait, someone wanna explain this?

Anyone know the EXACT part number for the 00-02 R/t manifold, and the 03+ Manifold?
I could of SWORE it's the same thing... but we're most defentally getting different prices for all of this...

jmr · Post by **jmr** » Wed Mar 28, 2007 3:11 pm

I saw that too and asked the parts guy if that was the complete assembly. He said that part # 4884065AE was for the complete assembly. One way to verify is see if the weight is the same for the two part numbers. I'm not sure but I'm think the $182 part is the upper part of the manifold (although why would you sell them separately).

Another option is that Mopar Performance offered a polished intake for the R/T and SRT. The catalog I have is from 2004 and it shows the entire manifold although I don't know what the part number is for it.

We need a lifeline...doesn't one of our members work for a dealership ?

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 3:12 pm

blackroseracing

He'll shoot the part number when he see's this....

JRM · Post by **JRM** » Wed Mar 28, 2007 3:31 pm

http://forum.2gn.org/viewtopic.php?t=18149

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 3:32 pm

Searched and seen that already. It doesn't specify 00-02 or 03-05

JRM · Post by **JRM** » Wed Mar 28, 2007 3:34 pm

I dont think there is a difference
Edit: It does say from 02 parts manual. But I dont think the intake manifolds are different from 00-05 just 1st and 2nd gen sohc

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 3:35 pm

i didn't think so either, but look at my screen shot, look at his price... nothing is adding up

JRM · Post by **JRM** » Wed Mar 28, 2007 3:38 pm

The first one listed is the regular intake manifold
The second is the r/t manifold
The third is listed as 2.4l dohc so it is the srt4 manifold

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 3:43 pm

That part number that was first mentioned.

jmr · Post by **jmr** » Wed Mar 28, 2007 3:44 pm

That doesn't make sense according to the search it should be $182. I wonder what the difference is between the 2 part numbers ?

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Mar 28, 2007 3:46 pm

Yeap, that's what I'm trying to figure out....

Your part number years say: all 2002, 2001, 2001 - 2004
Mine: 03 - 05

so um... yea... *shrugs* i have no idea

SlvrACR · Post by **SlvrACR** » Wed Mar 28, 2007 4:31 pm

Ya but then you have to pay to $80 (IIRC the price) for the motor to run the secondaries and I believe they were hard to get and running out

J-Villa · Post by **J-Villa** » Wed Mar 28, 2007 6:21 pm

Opi wrote:Yeap, that's what I'm trying to figure out....

Your part number years say: all 2002, 2001, 2001 - 2004
Mine: 03 - 05

so um... yea... *shrugs* i have no idea

well the mag intake was only availible those years 01-04

BlackRoseRacing · Post by **BlackRoseRacing** » Fri Mar 30, 2007 5:05 am

4884065AE - Runners - $364msrp
5018787AC - Manifold (includes MTV and butterflies) - $234msrp

Model Year In: 2001
Model Year Out: 2005

Model year in (when part started to be available or used)
Model year out (the year or production year they stopped using it)

http://forum.2gn.org/viewtopic.php?t=18 ... ght=magnum

Adam_T · Post by **Adam_T** » Fri Mar 30, 2007 8:34 am

so the total price for a full magnum intake manifold with the butterflies and the whole shebang is around....500$??

Mr Josh Zombie · Post by **Mr Josh Zombie** » Fri Mar 30, 2007 8:36 am

$465+shipping

GAY

jmr · Post by **jmr** » Fri Mar 30, 2007 10:06 am

Ouch this is gonna hurt....

I got this info from member T Vago's garage info. He has actually ordered a Magnum intake on-line (great info bro). This concurs with BlackRoseRacing's comments.

Has to be bought in pieces 1 x 4884065AE - upper manifold 1 x 5018787AC - lower manifold (included tuning valve actuator & mounting screws, brake vacuum hose, and MAP sensor) 1 x 4884067AB - plenum gasket between upper and lower manifold 1 x 4648623AB - gasket between intake manifold and cylinder head

Adam_T · Post by **Adam_T** » Fri Mar 30, 2007 10:55 am

jesus christ. what we need to know is...

how much can we get the WHOLE magnum intake manifold with all nuts and bolts, manifold, gaskets, and all that stuff...

how much it would be for the complete magnum intake mani setup at blackroseracing price.

Mr Josh Zombie · Post by **Mr Josh Zombie** » Fri Mar 30, 2007 11:01 am

Stop being lazy adam!

www.dodgeparts.com

start pluggin in part numbers.

Read stickies. BRR no longer can give us discounts. He hasn't been able to for a good month. Dodgeparts is probably your best bet.

Adam_T · Post by **Adam_T** » Fri Mar 30, 2007 11:11 am

NO MORE DISCOUNT WHAT SO EVER?!

wtf. i thought they just made the 30% discount to 20%.

Mr Josh Zombie · Post by **Mr Josh Zombie** » Fri Mar 30, 2007 11:14 am

http://forum.2gn.org/viewtopic.php?t=17626

Adam_T · Post by **Adam_T** » Fri Mar 30, 2007 11:20 am

der i read that. and the link doesnt work that he posted on there. i am just wondering why now so i was trying to read his link.

sucks.