SXT vs SRT fogs

MoparNeonMan · Post by **MoparNeonMan** » Thu Apr 26, 2007 4:34 am

I know the SRT fogs use a dirrent bulb than the SXT (899 vs 9145). Does anyone know if the fog assemblies can be interchanged?

01WhiteNe0n · Post by **01WhiteNe0n** » Thu Apr 26, 2007 11:48 am

Are you changing to an srt bumper ? If so i think you'll just need the srt housing...

Ps If you go srt bumper, I'll buy your stocker.

Mr Josh Zombie · Post by **Mr Josh Zombie** » Thu Apr 26, 2007 11:59 am

SRT and SXT use the same fog house.

But, I dunno about the bulb size... I thought it was all the same.

joelrgr · Post by **joelrgr** » Thu Apr 26, 2007 1:53 pm

I used SXT foglights from DEPO on my SRT bumper and everything mounted fine. My neon didnt come with foglights so i made my own relays/wiring/harness/switch so i dont know about your connection. Id imagine itd be the same.

orangeblast05 · Post by **orangeblast05** » Thu Apr 26, 2007 9:18 pm

Well they are the same bulb!!

-Devil- · Post by **-Devil-** » Thu Apr 26, 2007 9:44 pm

the 9145 is normally the export bulb ... which has a slightly larger housing then most of the 800 series ... and there are about 2 to 3 variations of the plug as well ...

not the answer you were seeking .. just putting it out there for you ...

TNK · Post by **TNK** » Thu Apr 26, 2007 10:01 pm

if you use stock SXT fogs and wiring, it will fit directly into your SRT front. im using my SXT fogs with my SRT front.

MoparNeonMan · Post by **MoparNeonMan** » Fri Apr 27, 2007 1:52 am

im not swapping bumpers....im wanting to swap to the 9145 bulb