p0123 and p0118

speedyrb29 · Post by **speedyrb29** » Sat Apr 28, 2007 10:36 pm

P0118(M) ECT Sensor Voltage Too High Engine coolant temperature sensor input above the maximum acceptable voltage

P0123(M) Throttle Position Sensor Voltage Throttle position sensor input above the maximum High acceptable voltage

any 1 have any ideas opn how to fix this?

im thinking about just installing my ms to take car of it.

could this be cuasing my car not to start it cranks but no start

kc2005ptgt · Post by **kc2005ptgt** » Sat Apr 28, 2007 11:20 pm

depends on voltage in battery, I think you need 11.6V to turn a starter.

edit: original question was editted

speedyrb29 · Post by **speedyrb29** » Sun Apr 29, 2007 2:55 pm

k got it started but it stoped would a 0118 or a 0123 code satop it from starting? also if your fuel pump is shot would it show a code?

also the engine cranks but dose not start seems like its getting no fuel?

nofrills05 · Post by **nofrills05** » Sun Apr 29, 2007 6:20 pm

what about spark?

speedyrb29 · Post by **speedyrb29** » Sun Apr 29, 2007 6:26 pm

no spark that why im thinking its 1 of them codes telling the ecu not to give spark

fuel is getting to the rail, no signs of spark engine dose turn over.

kc2005ptgt · Post by **kc2005ptgt** » Mon Apr 30, 2007 4:01 pm

when you turn key to ON position, do you hear your fuel pump click/turn on? It makes a small buzz that is audible with windows down, sometimes even when it is just really quiet.

speedyrb29 · Post by **speedyrb29** » Mon Apr 30, 2007 6:25 pm

yea u herd the buse. i got it working now i just pulled out the starter relay and put it back in and it work...idk my car confuses me lol

gilly02le · Post by **gilly02le** » Tue May 01, 2007 11:00 am

may have just lost its mind.. i had the o2 sensor wires short out on the lower sensor.. and it blew the fuel pump fuse, and i still had to unplug/re-plug the relay before the car would start.. even tho the relay was fine..