still trying to find

underway · Post by **underway** » Mon May 07, 2007 3:37 pm

ive been lookin on here and everywhere else on the internet...and ive asked several different times but it seems no one has an answer...... do they make a decent spring or coilover set ups for rally use.... if they make a tall ride height firm spring i can just buy illuminas and use those springs....or if theres a good tall coil over then that will work too.... needs to be ATLEAST stock ride height..i bought some srt4 springs off of steelybob and am gunna mess with those on my kyb's....but thats just temporary..im sure ill out grow that very shortly after trying them.... i plan to jump the car..pls any info will help....

ewetho · Post by **ewetho** » Mon May 07, 2007 6:42 pm

You may need to find someone doing it and contact them. But you probably have to have springs made to tailor ride height to what you desire.

underway · Post by **underway** » Mon May 07, 2007 7:54 pm

well i was thinkin....wat if i took the stock srt4 springs and then also chopped my current eibach lowering springs to like half the size and made a like spacer for between the two.... then i would have serious height and soft ride for light bumps then when the soft srt4 spring maxed out there was still the firm eibach spring ...kinda ghetto but if i do it right it could be pretty nice.... like 10 inches of ground clearance would be cool.... just a cheap solution...

ewetho · Post by **ewetho** » Mon May 07, 2007 9:18 pm

Just look for people who make springs and order a set. I was looking into it and found a couple of places that were about 285 an axle and you could spec ride height and spring rates.