Part Number Request: Injector cover studs

J-Villa · Post by **J-Villa** » Tue May 22, 2007 12:16 pm

i need the two studs or bolts....p/n please

lilschmied · Post by **lilschmied** » Tue May 22, 2007 1:46 pm

6505 873AA Stud Fuel Rail Attach M8x1.25x38.8

is the stud listed for 02 and is 20mm longer than the 00 bolt

Post by **racer12306** » Tue May 22, 2007 2:51 pm

20mm??

are you sure. thats quite a bit longer

lilschmied · Post by **lilschmied** » Tue May 22, 2007 4:51 pm

yeah because it's just a bolt no stud on top

Post by **racer12306** » Tue May 22, 2007 4:54 pm

o, ok.

missed that you were comparing the bolt to the stud.

J-Villa, I have two of the injector cover studs. one is a little rusty looking. PM me if you are interested.

BlackRoseRacing · Post by **BlackRoseRacing** » Wed May 23, 2007 4:37 am

http://forum.2gn.org/viewtopic.php?t=80 ... ctor+cover

I thought there was a listing here somewhere

J-Villa · Post by **J-Villa** » Wed May 23, 2007 9:43 pm

oops...well i bought two bolts off of racer anyways haha

SteelBlue · Post by **SteelBlue** » Fri Mar 07, 2008 9:27 pm

Okay so #6505873AA is the two bolts but the cover I found at the JY only had one of those little black caps. Is there a part number for that or is it only available if you buy the cover as well?
Thanks guys!

Post by **Diablo0** » Fri Mar 07, 2008 9:34 pm

You have to order two, thats just for one bolt.

The black things only come with the cover last time I looked...

Danteneon · Post by **Danteneon** » Fri Mar 07, 2008 9:36 pm

Yep.

SteelBlue · Post by **SteelBlue** » Fri Mar 07, 2008 9:44 pm

Oh okay. I would have felt pretty stupid only ordering one bolt. Sucks that the caps aren't separate, will have to check out the JYs again for a second cap then. Thanks!

Post by **Diablo0** » Fri Mar 07, 2008 11:27 pm

Or order the High Output cover since they used to be dirt cheap compared to the regular 2.0L cover lol.

SteelBlue · Post by **SteelBlue** » Sat Mar 08, 2008 9:59 pm

^Yeah there's a thought. Then I could sell the High Output cover (or keep it as a paperweight lol). I don't have any good JYs around here anyway, theyre all down in Cali.

BRR or Dante- would it be too much to ask for an average price on both the injector covers and the bolts? Here are the numbers so that you don't have to look them up again..

Fuel Injector Cover
4891356AB - 2.0L Non-Magnum
4891410AB - 2.0L Magnum (High Output)
6505873AA - Studded Bolts

Thanks, Crystal

Post by **Diablo0** » Sat Mar 08, 2008 10:05 pm

2.0L Non-Mag = 48.60 USD
2.0L Magnum = 18.50 USD
Studded Bolts = 5.45 USD

SteelBlue · Post by **SteelBlue** » Sat Mar 08, 2008 10:15 pm

Wow thanks Jason. Weird how the magnum is so much cheaper... Think thats what I'll do, just get the HO cover and bolts.

NeonBluSXT · Post by **NeonBluSXT** » Fri Jul 11, 2008 6:29 am

I want to get one of these injector covers - who sells them lol? elp.....

Post by **occasional demons** » Fri Jul 11, 2008 10:50 pm

Any dealership, or the FS board.

NeonBluSXT · Post by **NeonBluSXT** » Sat Jul 12, 2008 5:22 am

I found a site that I think has it but they dont have pics. They are calling it a fuel injector harness.... Would that be right because I dont want to oder the wrong thing. I used part # 4891410AB - 2.0L Magnum (High Output) = 18.50 USD and it shows the same pricing an all. I emailed them but havent gotten anything back yet....... sigh

Post by **occasional demons** » Sat Jul 12, 2008 5:09 pm

Yes as long as the PN# is correct you will get the right thing. OEMdodgeprts list it as harness too, but I think it is just abbreviated for "injector harness cover". Don't forget the studs if your car doesn't have them. The fuel rail bolts without the little balls that the cover snaps onto won't work!

Part Number: 4891410AB COVER INJECTOR HARNE List Price $18.50 Your Price $12.77

Part Number: 6505873AA STUD FUEL RAIL ATTAC List Price $5.45 Your Price $3.74

NeonBluSXT · Post by **NeonBluSXT** » Sun Jul 13, 2008 6:15 pm

occasional demons wrote:Yes as long as the PN# is correct you will get the right thing. OEMdodgeprts list it as harness too, but I think it is just abbreviated for "injector harness cover". Don't forget the studs if your car doesn't have them. The fuel rail bolts without the little balls that the cover snaps onto won't work!

Part Number: 4891410AB COVER INJECTOR HARNE List Price $18.50 Your Price $12.77

Part Number: 6505873AA STUD FUEL RAIL ATTAC List Price $5.45 Your Price $3.74

well I ordered it... the prices were higher a bit so I hope I get the right thing lol. The part numbers I pasted from here so it should be right... we will see lol. Thank you Occasional for all your help

Post by **occasional demons** » Sun Jul 13, 2008 7:36 pm

Not a problem, someone has to pick up the slack while "Helpful Counterguy" is off at Carlisle!

Danteneon · Post by **Danteneon** » Mon Jul 14, 2008 5:55 pm

Actually, the helpful counter guy didn't get to go to Carlise

I haven't been on much the past two weeks (bought a house!). My computer died after the move as well.

But I do appreciate the help man

Post by **occasional demons** » Mon Jul 14, 2008 6:22 pm

Congrats on the house!
Suckage on PC problems and not making it to Carlisle! Guess I should have read the "going to Carlisle" thread a bit better, If you posted in there that you weren't making it!

Danteneon · Post by **Danteneon** » Tue Jul 15, 2008 1:45 pm

Yeah, I posted it. I didn't make a big deal about it since it was painful enough that I wasn't going

New computer up and running tonight hopefully

And thanks!