udp to alternator...

lvlistchif · Post by **lvlistchif** » Mon Jun 25, 2007 5:25 pm

does the alternator wrap around the bigger part of the crank pulley or the smaller part?

dgodard · Post by **dgodard** » Mon Jun 25, 2007 6:17 pm

bigger

Wenuden · Post by **Wenuden** » Mon Jun 25, 2007 6:17 pm

Whichever side is the same size as the pulley groove on the alternator?

lvlistchif · Post by **lvlistchif** » Mon Jun 25, 2007 7:00 pm

thanks

asanti · Post by **asanti** » Thu Jun 28, 2007 12:36 pm

lvlistchif Posted: Mon Jun 25, 2007 2:25 pm Post subject: udp to alternator...

--------------------------------------------------------------------------------

does the alternator wrap around the bigger part of the crank pulley or the smaller part?

To make life easier, if you're referring to the alternator BELT, it goes from the alternator pulley to the innermost set of grooves on the UDP. In other words the set of grooves that are right next to the block. The outermost grooves are for the power steering. Hope that clarifies things up a bit.

Later
Allex