Sway bar brackets

esteinmaier · Post by **esteinmaier** » Tue Jun 26, 2007 8:30 am

Does anyone have a strut laying around that has the sway bracket welded on? I need the measurements between the 2 bolts holding the strut onto the knuckle, and the measurements how much lower the bracket is than the bottom bolt, as well as the offset to the inside.
I'm cutting a set of brackets for another 2gn to bolt in a sway.

jmr · Post by **jmr** » Thu Jun 28, 2007 9:49 pm

I used a 1st gen rear bracket and a piece of angle iron. It was a cheap fix at $13 each.

Post by **racer12306** » Fri Jun 29, 2007 7:28 am

If possible could you send me more detailed pics of your setup jmr?

Thanks

daaboots · Post by **daaboots** » Tue Sep 11, 2007 7:52 am

You could always buy a set of mine

http://forum.2gn.org/viewtopic.php?t=19840