Speaker Replacement

zukman31 · Post by **zukman31** » Wed Jun 27, 2007 8:52 pm

OK I am wanting to replace all of my factory speakers in my 2001 Neon. Can anyone tell me the exact size I need to get so all I have to do is just replace them without cutting. I want a better sound, and all of the factorys are busted and sounds bad. What type does everyone recommend without killing my wallet !!!!

Thanks
Jimmy B..

Wenuden · Post by **Wenuden** » Wed Jun 27, 2007 9:19 pm

I've always used cerwin vega and never been let down. Never blown one, either. I'm actually satisfied with the kickers that came with my car.

boostinss · Post by **boostinss** » Wed Jun 27, 2007 10:46 pm

6.5's in the front
6X9's in the rear

Alpine or Infiniti from experience are the best

Anonymous User · Post by **Anonymous User** » Thu Jun 28, 2007 4:26 am

get some Pioneer revs...there probably one of the best speakers to run off of headunit power.

zukman31 · Post by **zukman31** » Sun Jul 01, 2007 3:20 pm

Thanks for everyone help. I replaced them all with Clarions.
I didnt want to spend a lot of money and for what they costed it sounds great.
Jimmy B..

jamsx1 · Post by **jamsx1** » Tue Sep 11, 2007 11:23 pm

Did you have any problums with the door speakers? How did the aftermarket ones mount to the stock 3 hole-finger set up?

Craz1000 · Post by **Craz1000** » Sun Sep 23, 2007 8:23 pm

they dont, you can buy an adapter plate, or if you baught alpines they convinently come with them, without the plate you have to position the speaker and use self taps

Chibits12 · Post by **Chibits12** » Tue Sep 25, 2007 1:01 am

I've had Infinity reference series speakers on my doors and rearside. I haven't replaced the tweeters up the dash. It's gonna be a bit of a pain removing the dash panelings.

Clarions sound great too so good choice.

Hudson_Neon · Post by **Hudson_Neon** » Tue Sep 25, 2007 1:34 am

actually the dash is easy, just 4 screws. here's my how-to on speaker replacement...

wow, just went to find it and when stuff got redone it somehow ended up in Part Numbers

http://forum.2gn.org/viewtopic.php?t=24413

Craz1000 · Post by **Craz1000** » Thu Sep 27, 2007 2:50 am

teh dash is easy as hell to remove, you remove teh screw right above the fuse panel, one on the opposite side, 2 at the defroster hole, remove teh A-pillar covers and out pops the dash, the doors are even easier