here's a few quick pics I took of my 02 neon. I mainly tooks these because I'm going to be putting SRT springs on it soon (waiting for struts), and I wanted to have before and after pics. The only visable mods currently is my exhaust (which draws attention to my split bumper), and my removed mouldings. This post will show "Point A" in my mods, so I can post pics later of "Point B" and so on.
Still Very Stock Pics Before Visable Mods
Still Very Stock Pics Before Visable Mods
Hey all,
here's a few quick pics I took of my 02 neon. I mainly tooks these because I'm going to be putting SRT springs on it soon (waiting for struts), and I wanted to have before and after pics. The only visable mods currently is my exhaust (which draws attention to my split bumper), and my removed mouldings. This post will show "Point A" in my mods, so I can post pics later of "Point B" and so on.




here's a few quick pics I took of my 02 neon. I mainly tooks these because I'm going to be putting SRT springs on it soon (waiting for struts), and I wanted to have before and after pics. The only visable mods currently is my exhaust (which draws attention to my split bumper), and my removed mouldings. This post will show "Point A" in my mods, so I can post pics later of "Point B" and so on.
Silver MTX 2002 Neon S (base with a CD player)
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.
- MyNeonSaysHi
- 2GN Veteran
- Posts: 11898
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
-
Cbussilver01es
- 2GN Member
- Posts: 837
- Joined: Tue Jan 30, 2007 1:03 am
- Location: New Albany, OH
SILVER AGAIN FTW!!!
nice and clean just the way I like it! 
-Sean
01 Dodge Neon MSII 2.0 DOHC turbo, '13 Dodge Dart Mopar Edition 1.4 Multi-Air turbo

Nos is a lot like a hot chick with std's you wanna hit it but are afraid of the consequences.
http://www.cardomain.com/ride/2311033
01 Dodge Neon MSII 2.0 DOHC turbo, '13 Dodge Dart Mopar Edition 1.4 Multi-Air turbo

Nos is a lot like a hot chick with std's you wanna hit it but are afraid of the consequences.
http://www.cardomain.com/ride/2311033
-
supertrick_05
- 2GN Member
- Posts: 4225
- Joined: Thu Jul 21, 2005 9:09 pm
- Location: Duluth, MN
- Contact:
Yeah, that's why I wanted a before an after because I've heard the change is very subtle.SRT springs won't drop it much, but will give it a better stance.
Yeah, I mourn every time I see it. Finding a new bumper is on the top of my list. Especially since I got the exhaust on, it just seem to draw attention to it.Holy nasty rear bumper crack Batman!
Nope, but close. I live in Arizona.is that a new mexico plate?
The camera was kind to my car. It's been a door ding magnet ever since I purchased, and I have the typical yellowed headlights that about everyone here in AZ has.
Thanks for the comments guys!
Kevin
Silver MTX 2002 Neon S (base with a CD player)
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.
It is a tip, but it's welded onto a resonator.
A guy I work with had the parts, and used the hangers and such off my old stock muffler to fab together a custom axle back setup. The resonator is very small, so I don't have the huge/heavy muffler sitting back there any more, and it's straight through so performance has improved.
Wasn't totally what I wanted, but for 0 dollars spent I'm not complaining.
Kevin
Edit: by tip I mean just a chrome end. It's not one of those noise maker ones from pepboys. I think it's off of an Intrepid RT, but I'm not sure.
A guy I work with had the parts, and used the hangers and such off my old stock muffler to fab together a custom axle back setup. The resonator is very small, so I don't have the huge/heavy muffler sitting back there any more, and it's straight through so performance has improved.
Wasn't totally what I wanted, but for 0 dollars spent I'm not complaining.
Kevin
Edit: by tip I mean just a chrome end. It's not one of those noise maker ones from pepboys. I think it's off of an Intrepid RT, but I'm not sure.
Silver MTX 2002 Neon S (base with a CD player)
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.
Mods: K&N Drop in/removed resonator,Half-shaft mod+1gn Throttle Plate, custom axle back exhaust, UDP, Magnum Header,04 SXT Cluster (Tach! Yay!). In the works: SRT4 Springs, PT Clutch, Maddog STS W/jonnymopar and boogers, Engine Rebuild.



