Another catch can

Post by **racer12306** » Mon Aug 27, 2007 3:48 pm

I was looking through the latest JEG'S catalog and noticed an Air Oil Separator kit. It is very similar to the $20 catch can, but looks a little nicer. It is $45, so its a little pricey. But it does come with a mounting bracket and the hose barb fittings. It does look like it has a nice little drain.

For those who are interested the part number is 555-52205.

http://www.jegs.com/webapp/wcs/stores/s ... _396863_-1

mike9fore · Post by **mike9fore** » Mon Aug 27, 2007 3:56 pm

racer12306 wrote:I was looking through the latest JEG'S catalog and noticed an Air Oil Separator kit. It is very similar to the $20 catch can, but looks a little nicer. It is $45, so its a little pricey. But it does come with a mounting bracket and the hose barb fittings. It does look like it has a nice little drain.

For those who are interested the part number is 555-52205.

http://www.jegs.com/webapp/wcs/stores/s ... _396863_-1

What would be the dif. between the one on Jeggs and The GReddy one on Modern? http://modernperformance.com/all/greddycatchcan.shtml

I am just curious

Post by **racer12306** » Mon Aug 27, 2007 3:59 pm

The one from JEG'S would be much smaller. Probably about the same size as the $20 catch can which is about 3 or 4 inches tall and 1.5 inches in diameter, not including the barbs.

SGT BRAD · Post by **SGT BRAD** » Tue Aug 28, 2007 11:15 am

that actually looks like a pretty good set-up that comes complete. i have the boomba catch can. piecing a drain/petcock system for it has been a bit of a pain. btw i paid a lot more than 45.00 for it too!!!

kc2005ptgt · Post by **kc2005ptgt** » Tue Aug 28, 2007 11:18 am

Hey, wow, I like that! Looks really nice for sure, and yteah, just like the $20 route I have, which personally I like very well... I just have to remember to empty it more often

Post by **occasional demons** » Tue Aug 28, 2007 12:47 pm

The only thing with separators is the air has to be realitively cool so the oil/moisture will drain to the bottom other wise it is still in a vapor state and will pass through. I installed a atf cooler from a radiator tank in line with mine it works OK but I still need more cooling as I'm still getting oil in my intake. I'm running a copper line from my valve cover to the separator and you'd be amazed how hot the air is comming out of the valve cover.

MyNeonSaysHi · Post by **MyNeonSaysHi** » Tue Aug 28, 2007 3:32 pm

Nice link racer, you should put it in your how-to. I will probably pick one up to go between my intake and my valve cover. Looks pretty small which is a plus.

Post by **racer12306** » Tue Aug 28, 2007 3:36 pm

I'm already one step ahead of you. It's already in my original post in the how-to.

2GN.ORG

Another catch can

Another catch can

Re: Another catch can