Stock exhaust look just so I can BS the cops!!
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
Stock exhaust look just so I can BS the cops!!
Okay when I get my LT header installed I preferably want to get a single exit exhaust right out my drivers side rear. I already have a cut out for my current exhaust, it makes sense and with all the crowd going with dual exhausts it is different. Problem. Noise and my local police officers. Folks are getting pulled over all the time around here for modified exhaust systems. It doesn't have to be loud they just have to pull you over saying it "appears" to be a modified exhaust and then they have legal right to check. With my engine you will be able to tell even with a resonator/glasspack. So I am thinking of going with a Magnaflow dual tip and when the cop asks or inspects I can bullshit him into believing it is a stock R/T Neon exhaust direct from mother Mopar herself!! So I think the dual tips would be better for the sleeper effect. If I still get a ticket then I can bullshit the judge with pictures and dealership testimonials. Think it would work?
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
Yeah but its too restrictive for a 2.5 pipe with a nitrous build though.03blackrt wrote:I find the stock r/t exhaust is nice with my lth. It's relatively quiet when I'm not on the go pedal. IMO
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
Yeah a muffler is a must have
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
- bone-yard-racing
- 2GN Member
- Posts: 2328
- Joined: Fri Dec 15, 2006 9:36 pm
- Location: York PA
- Contact:
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
By cutout I mean the bumper is cut out for my drivers side exhaust. Hard to BS the courts that Neons came with a drivers side exhaust.jckevns wrote:If you're running a cutout what difference does it make what muffler you put on. If the police are as picky as you say get the quitest muffler you can find
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
My bad I thought you were talking about an exhuast cutoutsoul_sword34 wrote:By cutout I mean the bumper is cut out for my drivers side exhaust. Hard to BS the courts that Neons came with a drivers side exhaust.jckevns wrote:If you're running a cutout what difference does it make what muffler you put on. If the police are as picky as you say get the quitest muffler you can find

Phone Booth Member: 006
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
I guess I'm doomed to get the Magnaflow dual exhaust...oh yeah and I'm getting a cutout exhaust just for the track and to scare people with 
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
- half_twisted
- 2GN Member
- Posts: 729
- Joined: Thu Jul 21, 2005 11:31 pm
- Location: Anaheim Ca.
- Contact:
Sounds like you have a good plan cooked up but....
if anything your going to have to prove the judge that your car is an r/t model.. car registration and vin might not match your story.. And in court its not what you can say, its what you can prove. your going to have to be careful when they stop you and make sure they write the correct citation.. Some cops give the citation where you have a mandatory appearance in court and need to take your car to your local state vehicle referee to get a full inspection to make sure you corrected the mod and then show the judge..
i got pulled for moded intake with no emissions sticker and ended up taking 4 months and 3 trips to the referee after he failed me twice.. Good luck
if anything your going to have to prove the judge that your car is an r/t model.. car registration and vin might not match your story.. And in court its not what you can say, its what you can prove. your going to have to be careful when they stop you and make sure they write the correct citation.. Some cops give the citation where you have a mandatory appearance in court and need to take your car to your local state vehicle referee to get a full inspection to make sure you corrected the mod and then show the judge..
i got pulled for moded intake with no emissions sticker and ended up taking 4 months and 3 trips to the referee after he failed me twice.. Good luck

-
contagious18
- 2010 Silver Contributor
- Posts: 2420
- Joined: Wed Feb 21, 2007 3:18 pm
- Location: Stockton, CA
shoot i have da same problem, i bought a srt rear section and instead of da pipes stickin out ima put turndowns
Antagonist crew| Official "I'm Going to Drive My Neon till it Dies" Club #000031
http://www.cardomain.com/ride/2569968
http://contagious209.mybrute.com
http://www.cardomain.com/ride/2569968
http://contagious209.mybrute.com
- soul_sword34
- 2GN Member
- Posts: 621
- Joined: Wed Aug 31, 2005 7:58 pm
- Location: Idaho
- Contact:
Don't think I'd have to prove it's and R/T seeing how SXT's can get the dual exhaust option.half_twisted wrote:Sounds like you have a good plan cooked up but....
if anything your going to have to prove the judge that your car is an r/t model.. car registration and vin might not match your story.. And in court its not what you can say, its what you can prove. your going to have to be careful when they stop you and make sure they write the correct citation.. Some cops give the citation where you have a mandatory appearance in court and need to take your car to your local state vehicle referee to get a full inspection to make sure you corrected the mod and then show the judge..
i got pulled for moded intake with no emissions sticker and ended up taking 4 months and 3 trips to the referee after he failed me twice.. Good luck
Project Log viewtopic.php?t=27630
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
MP 60mm TB, K&N filter, Magnaflow muffler, Deyeme solid torque struts, MTX 3.55, Kyle shift end links, Booger bushings, Mopure STS, Powerslot rotors, 15" Rota Slipstreams, Falken Ziex 512's, Koni Yellow inserts, Hotchkis sways, Eibach pro springs. Work in progress.
- TheNumberOneD
- 2GN Member
- Posts: 729
- Joined: Sun Aug 27, 2006 11:25 pm
- Location: Texas
- Contact:

