exhaust

bstc00 · Post by **bstc00** » Wed Sep 26, 2007 1:32 am

Im looking for a highflow exhaust that is on the quit side. I had a thermal r&d but was to much for me. Can anyone out there help me. I have a 2 gen R/T

bstc00 · Post by **bstc00** » Wed Sep 26, 2007 11:54 am

ANYONE HAVE AN IDEA?

Mr Josh Zombie · Post by **Mr Josh Zombie** » Wed Sep 26, 2007 12:10 pm

Go back to stock. It's the highest flowing muffler you'll get.

bstc00 · Post by **bstc00** » Wed Sep 26, 2007 12:42 pm

I did and there was a losse in power.

rOniN · Post by **rOniN** » Wed Sep 26, 2007 1:37 pm

power brings noise...to quiet the exhaust down you will have to lose some power because you are restricting the flow.

kc2005ptgt · Post by **kc2005ptgt** » Wed Sep 26, 2007 1:42 pm

I actually heard from several mechanics that the RT muffler, although pretty free-flowing, is pretty restrictive when compared to cannon type and straight mufflers out there. One of the best mufflers you can get is a glasspack, mainly because it is straight, similar in width to the stock piping, but it will be loud as hell, which goes to verify what you said above.... power brings noise.

My car made almost 8 hp more going from stock exhaust (for the most part) to my 3" cutout ---- that is straight shot from the header to the outside world... no cat, no piping, no bends, no muffler, no resinators, nothing... and DAMN it is loud.

You want quiet and performance, you will not find it... I would either go back to stock or stick with what you have.

bstc00 · Post by **bstc00** » Wed Sep 26, 2007 2:10 pm

ok thanks alot

CrashTeam · Post by **CrashTeam** » Fri Sep 28, 2007 10:30 am

^^^Interesting Mods in ur sig, What kinda power at the wheels are you putting out?

bstc00 · Post by **bstc00** » Fri Sep 28, 2007 11:20 am

I have no idea. I dont have the thermal R&D anymore, so there was a lot of power lose there...to loud. Im looking for something that will put out power and no be so loud.

CrashTeam · Post by **CrashTeam** » Fri Sep 28, 2007 2:02 pm

Are you a 03+ or 01-02?

bstc00 · Post by **bstc00** » Sun Sep 30, 2007 9:28 pm

im 01

Floyd · Post by **Floyd** » Sun Sep 30, 2007 9:59 pm

my 04 with similar mods only put down 120hp 125tq

bstc00 · Post by **bstc00** » Mon Oct 01, 2007 7:01 am

thats cool...the 01 r/t had more power then the 04

bstc00 · Post by **bstc00** » Wed Oct 03, 2007 11:46 pm

infil · Post by **infil** » Thu Oct 04, 2007 2:39 pm

keep in mind on an na setup you need some pressure to build up in the piping to keep the exhaust working for you via scavenging as long as you can. Too much resistance=bad, not enough=just as bad.